Publikationen LKT
2024 Addis LB. , Sendekie ZB. , Habtu NG. , Schubert DW. , Roether J. , Boccaccini AR. :False banana fiber reinforced geopolymer composite – A novel sustainable material Ceramics International 2024 )ISSN: 0272-8842 10.1016/j.ceramint.2024.04.177 Baumgärtner B. , Sienz V. , Hausotte T. :Investigation of the shape-changing property of X-ray
computed tomography in the evaluation of pores 20th World Conference on Non-Destrucutve Testing (Incheon, Korea 27. Mai 2024 - 31. Mai 2024 )In: NDT.net (Hrsg.): Special Issue of e-Journal of Nondestructive Testing (eJNDT) ISSN 1435-4934 2024 10.58286/29950 https://www.ndt.net/article/wcndt2024/papers/A20231016-1916_E.pdf Cholewa S. , Forstner T. , Drummer D. :β-Modification in heterogeneous polypropylene for laser-based powder bed fusion of polymers Progress in Additive Manufacturing 2024 )ISSN: 2363-9512 10.1007/s40964-024-00672-3 https://rdcu.be/dJR4I Cholewa S. , Jaksch A. , Drummer D. :Polypropylene in laser-based powder bed fusion of polymers 38th International Conference of the Polymer Processing Society (St. Gallen 22. Mai 2023 - 26. Mai 2023 )In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024 10.1063/5.0204599 Forstner T. , Cholewa S. , Drummer D. :Enhanced Feedstock Processability for the Indirect Additive Manufacturing of Metals by Material Extrusion through Ethylene–Propylene Copolymer Modification Polymers 16 2024 ), Art.Nr.: 2658 ISSN: 2073-4360 10.3390/polym16182658 https://www.mdpi.com/2073-4360/16/18/2658/pdf Forstner T. , Cholewa S. , Drummer D. :Influence of wax addition on feedstock processing behavior in additive manufacturing of metals by material extrusion Progress in Additive Manufacturing 2024 )ISSN: 2363-9512 10.1007/s40964-024-00671-4 https://rdcu.be/dID9h Forstner T. , Drummer D. :Continuous production of cellular ceramics through thermoplastic foam extrusion SPE ANTEC 2024 (St. Louis, Missouri 4. März 2024 - 7. März 2024 )Forstner T. , Drummer D. :Understanding chemical foaming of highly filled ceramic feedstocks for injection molding 38th International Conference of the Polymer Processing Society (St. Gallen 22. Mai 2023 - 26. Mai 2023 )In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024 10.1063/5.0204509 Kaufmann A. , Schlicht S. , Rösel U. , Drummer D. :Adhesion‐controlled anisotropic rotational molding of multilayered ultrasoft silicone films Polymer Engineering and Science 2024 )ISSN: 0032-3888 10.1002/pen.26869 Li S. , Wu W. , Drummer D. , Tomiak F. , Wang Y. , Lu Z. , Zhao X. :Copper Modified Boron Nitride And Graphene Combined To Self-Assemble Three-Dimensional Thermal Conductivity Framework to Improve the Thermal Conductivity of Epoxy Resin Applied Composite Materials 2024 )ISSN: 0929-189X 10.1007/s10443-023-10195-9 Ma Z. , Jiang B. , Drummer D. , Zhang L. :Composite electroforming of precision Ni-P-PTFE mold inserts with low internal stress and self-lubricating properties Surface & Coatings Technology 494 2024 ), Art.Nr.: 131488 ISSN: 0257-8972 10.1016/j.surfcoat.2024.131488 Ma Z. , Jiang B. , Drummer D. , Zhang L. :Influence of phosphorous acid concentration on the self-lubricating properties of electroformed Ni-P-PTFE ternary composites Surface & Coatings Technology 477 2024 ), Art.Nr.: 130375 ISSN: 0257-8972 10.1016/j.surfcoat.2024.130375 Popp J. , Drummer D. :Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts Applied Composite Materials 2024 )ISSN: 0929-189X 10.1007/s10443-024-10203-6#citeas Romeis M. , Ehrngruber M. , Drummer D. :Investigation of the effects of energy density in Laser Sintering of polypropylene on morphological and dielectric properties for high-frequency antennas 13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU 15. September 2024 - 19. September 2024 )In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024 10.1016/j.procir.2024.08.112 Romeis M. , Ehrngruber M. , Drummer D. :Laser-Sintering of Cyclic Olefine Copolymer for Low Dielectric Loss Applications Polymers 16 2024 ), Art.Nr.: 1751 ISSN: 2073-4360 10.3390/polym16121751 Rothammer B. , Feile K. , Werner S. , Frank R. , Bartz M. , Wartzack S. , Schubert DW. , Drummer D. , Detsch R. , Wang B. , Rosenkranz A. , Marian M. :Ti3C2Tx-UHMWPE nanocomposites—Towards an enhanced wear-resistance of biomedical implants Journal of Biomedical Materials Research Part A 2024 ), S. 1 -15 ISSN: 1549-3296 10.1002/jbm.a.37819 Rösel U. , Drummer D. :Changes in Material Behavior according to the Amount of Recycled Magnetic Materials in Polymer-Bonded Magnets Based on Thermoplastics Magnetism 4 2024 ), S. 1-23 ISSN: 2673-8724 10.org./10.3390/magnetism4010001 Rösel U. , Drummer D. :Evaluation of a Recycling Strategy for Polymer-Bonded Magnets Based on Thermosets Recycling 9 2024 ), S. 81 ISSN: 2313-4321 10.3390/recycling9050081 Rösel U. , Drummer D. :Influence of Different Filler Systems on the Thermal Conductivity and Mechanical Properties of Thermosets Polymers 16 2024 ), S. 2917 ISSN: 2073-4360 10.3390/polym16202917 Rösel U. , Drummer D. :The Influence of the Design and Technological Parameters of Polymer-Based Multipolar Magnets with SrFeO Hard Magnetic Filler on the Residual Magnetic Properties Magnetism 2024 )ISSN: 2673-8724 10.3390/magnetism4030011 Schlicht S. , Campbell JC. , Weber AC. , Westhoff J. , Volodkin D. , Fischer D. , Drummer D. , Vikulina A. :Vaterite-based in situ surface modification and process-dependent biocompatibility of laser sintered polypropylene Journal of Materials Research and Technology 2024 )ISSN: 2238-7854 10.1016/j.jmrt.2024.08.112 Schlicht S. , Detsch R. , Nawaz Q. , Boccaccini AR. , Drummer D. :Process- and topography-related cell viability on laser sintered polypropylene 8th China-Europe Symposium on Biomaterials in Regenerative Medicine (Nürnberg 15. September 2024 - 18. September 2024 )Schlicht S. , Drummer D. :Geometry-induced process and part characteristics in support-free powder bed fusion of polypropylene at room temperature Progress in Additive Manufacturing 9 2024 )ISSN: 2363-9512 10.1007/s40964-024-00656-3 Schlicht S. , Drummer D. :Laser-Based Additive Manufacturing of Polypropylene-Agarose Composites: Processing Properties and Compressive Mechanical Properties 38th International Conference of the Polymer Processing Society (St. Gallen 22. Mai 2023 - 26. Mai 2023 )In: Proceedings of the 38th International Conference of the Polymer Processing Society (PPS-38) , College Park, Maryland 2024 10.1063/5.0204523 Schlicht S. , Drummer D. :Layer-dependent temperature evolution and cooling kinetics in non-isothermal Powder Bed Fusion of polypropylene Procedia CIRP 124 2024 ), S. 261-264 ISSN: 2212-8271 10.1016/j.procir.2024.08.113 Schlicht S. , Gabriel C. , Drummer D. :Low temperature powder bed fusion of polyamide 6: transient process characteristics and process-dependent part properties Progress in Additive Manufacturing 2024 )ISSN: 2363-9512 10.1007/s40964-024-00812-9 Schlicht S. , Kaufmann A. , Kleffel T. , Drummer D. :Biomechanische Metamaterialien – Prozesse, Möglichkeiten und Perspektiven 38. Engelberger Kunststofftechnisches Seminar 2024 (Engelberg 9. März 2024 - 14. März 2024 )Schlicht S. , Kaufmann A. , Tur B. , Kniesburges S. , Drummer D. :Highly dynamic rotational molding of thin-walled larynx models for fluid dynamic modelling 13th International Conference on Voice Physiology and Biomechanics (Erlangen 22. Juli 2024 - 26. Juli 2024 )In: Proceedings of the 13th International Conference on Voice Physiology and Biomechanics 2024 Schlicht S. , Wesinger M. , Kaufmann A. , Rösel U. , Fischer D. , Drummer D. :Multiscale polyethylene fiber - nanocellulose fiber composites through laser fusion and bacterial in situ synthesis Conference of the Polymer Processing Society 2024 (Ferrol 30. September 2024 - 3. Oktober 2024 )Semmler M. , Eckhardt M. , Heinrich A. , Tur B. , Wolfsteiner S. , Schlicht S. , Drummer D. , Wendler O. , Döllinger M. :Rheological Analysis of Saliva Samples and its Influence on Voice Quality in Ectodermal Dysplasia 29th Congress of the European Society of Biomechanics (Edinburgh 29. Juni 2024 - 3. Juli 2024 )Tischer F. , Cholewa S. , Groppe P. , Granath T. , Düsenberg B. , Mandel K. , Drummer D. , Bück A. , Peukert W. , Schmidt J. :Magnetic polyamide 11 powder for the powder bed fusion process by liquid-liquid phase separation and crystallization Additive Manufacturing 88 2024 ), Art.Nr.: 104250 ISSN: 2214-7810 10.1016/j.addma.2024.104250 Tur B. , Gühring L. , Wendler O. , Schlicht S. , Drummer D. , Schützenberger A. , Kniesburges S. :Vibratory Response of an Adaptive Synthetic Larynx Model 13th International Conference on Voice Physiology and Biomechanics (Erlangen 22. Juli 2024 - 26. Juli 2024 )In: Proceedings of the 13th International Conference on Voice Physiology and Biomechanics 2024 Zhang L. , Yang D. , Ma Z. , Deng Z. , Li Z. , Drummer D. , Jiang B. :Pulse current electroforming of Ni-PTFE nanocomposite mold insert with long-lifetime and anti-adhesive properties Electrochimica Acta 491 2024 ), Art.Nr.: 144308 ISSN: 0013-4686 10.1016/j.electacta.2024.144308 Zhao X. , Wu W. , Drummer D. , Wang Y. , Liu C. , Li S. , Lu Z. :Interlayer growth of SiC nanowires in graphene aerogel for thermal conductivity enhancement of epoxy resin and its mechanism Polymer Composites 45 2024 ), S. 4513-4523 10.1002/pc.28077 2023 Baumgärtner B. , Rothfelder R. , Greiner S. , Breuning C. , Renner J. , Schmidt M. , Drummer D. , Körner C. , Markl M. , Hausotte T. :Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography Journal of Manufacturing and Materials Processing 2023 )ISSN: 2504-4494 10.3390/jmmp7030095 Cholewa S. , Jaksch A. , Drummer D. :Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow
Behavior, Processing, Temperature Profile, and Part Characteristics Solid Freeform Fabrication 2023: Proceeding of the 34th Annual International Solid Freeform Fabrication Symposium Cholewa S. , Jaksch A. , Drummer D. :Flame-retardant Polyamide 6 for Powder Bed Fusion of Polymers Rapid.Tech 3D (Erfurt 9. Mai 2023 - 11. Mai 2023 )In: Michael Kynast, Michael Eichmann, Gerd Witt (Hrsg.): Proceedings of the 19th Rapid.Tech 3D Conference 2023 Cholewa S. , Jaksch A. , Drummer D. :Structure Development of Semi-crystalline Polymers in Laser Based Powder Bed Fusion Antec 2023 (Denver, Colorado 27. März 2023 - 30. März 2023 )Cholewa S. , Stieglitz L. , Jaksch A. , Rieger B. , Drummer D. :Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability ACS Applied Polymer Materials 2023 )ISSN: 2637-6105 10.1021/acsapm.2c02112 Dong Y. , Jiang B. , Drummer D. , Zhang L. :Mass transfer characteristics at cathode/electrolyte interface during electrodeposition of nickel microcolumns with various aspect ratios Journal of Micromechanics and Microengineering 33 2023 ), Art.Nr.: 105007 ISSN: 0960-1317 10.1088/1361-6439/acee8a Dong Y. , Jiang B. , Qiang J. , Ma Z. , Drummer D. , Zhang L. :Tuning formation process of void defects in microcolumn arrays via pulse reverse electrodeposition Journal of Materials Research and Technology 24 2023 ), S. 3055-3066 ISSN: 2238-7854 10.1016/j.jmrt.2023.03.201 Drummer D. , Schlicht S. , Greiner S. :Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing 8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien 19. April 2023 - 22. April 2023 )In: Additive Manufacturing in Multidisciplinary Cooperation and Production , Cham 2023 10.1007/978-3-031-37671-9_23 Frank R. , Wittmann LM. , Kleffel T. , Roth B. , Graichen K. , Drummer D. :Investigating the Integration of Nonwoven Carbon Fibers for Mechanical Enhancement in Compression Molded Fiber-Reinforced Polymer Bipolar Plates Polymers 15 2023 ), Art.Nr.: 3891 ISSN: 2073-4360 10.3390/polym15193891 Greiner S. , Schlicht S. , Drummer D. :Understanding geometry dependent temperature fields in laser powder bed fusion of PA12 by means of infrared thermal imaging 8th International Conference on Additive Technologies iCAT (Maribor, Slowenien 19. April 2023 - 22. April 2023 )In: Additive Manufacturing in Multidisciplinary Cooperation and Production , Cham 2023 10.1007/978-3-031-37671-9_2 Herzog C. , Drummer D. :Influence of the injection molding process on the tooth deflection of plastic gears during operation 5th International Conference on High Performance Plastic Gears 2023 (Garching/ Munich 13. September 2023 - 15. September 2023 )Herzog C. , Drummer D. :Limitations of the Check Calculation for Tooth Deformation of Plastic Gears According to Gear Design Guideline VDI 2736 Polymers 15 2023 )ISSN: 2073-4360 10.3390/polym15183809 Herzog C. , Drummer D. :Test Rig for The In Situ Measurement of The Elastic Tooth
Deflection of Plastic Gears Polymers 15 2023 ), Art.Nr.: 1732 ISSN: 2073-4360 10.3390/polym15071732 Hesse N. , Jaksch A. , Kaschta J. , Groh D. , Drummer D. , Peukert W. , Schmidt J. :From trash to treasure in additive manufacturing: Recycling of polymer powders by acid catalyzed hydrolysis Additive Manufacturing 71 2023 ), Art.Nr.: 103591 ISSN: 2214-7810 10.1016/j.addma.2023.103591 Jaksch A. , Cholewa S. , Drummer D. :Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary
Antioxidant Incorporation Solid Freeform Fabrication 2023: Proceedings of the 34th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference Jaksch A. , Cholewa S. , Drummer D. :Thin-Walled Part Properties in Powder Bed Fusion of Polymers—A Comparative Study on Temperature Development and Part Performance Depending on Part Thickness and Orientation Journal of Manufacturing and Materials Processing 7 2023 ), Art.Nr.: 96 ISSN: 2504-4494 10.3390/jmmp7030096 Jiang B. , Dong Y. , Qiang J. , Drummer D. , ZHANGa L. :Effect of ion mass transfer and electric field distribution on the formation of void defect in electroformed nickel microcolumns Electrochemistry 91 2023 ), Art.Nr.: 087002 ISSN: 1344-3542 10.5796/electrochemistry.23-00058 Köhler D. , Popp J. , Kupfer R. , Troschitz J. , Drummer D. , Gude M. :In-Situ Computed Tomography - Analysis of a Single-Lap Shear Test with Composite-Metal Pin Joints 12th International Conference on Innovation in Aviation and Space for Opening New Horizons, EASN 2022 (Barcelona, ESP 18. Oktober 2022 - 21. Oktober 2022 )In: Journal of Physics: Conference Series 2023 10.1088/1742-6596/2526/1/012067 Li S. , Wu W. , Drummer D. , Wang Y. , Lu Z. , Zhao X. :Copper and graphene work together to construct a three-dimensional skeleton thermal conductivity network to improve the thermal conductivity of the epoxy resin Polymer Composites 2023 )10.1002/pc.27494 Lotter S. , Brand L. , Jamali V. , Schäfer M. , Loos H. , Unterweger H. , Greiner S. , Kirchner J. , Alexiou C. , Drummer D. , Fischer G. , Büttner A. , Schober R. :Experimental Research in Synthetic Molecular Communications - Part I IEEE Nanotechnology Magazine 2023 ), S. 1-12 ISSN: 1942-7808 10.1109/MNANO.2023.3262100 Lotter S. , Brand L. , Jamali V. , Schäfer M. , Loos HM. , Unterweger H. , Greiner S. , Kirchner J. , Alexiou C. , Drummer D. , Fischer G. , Büttner A. , Schober R. :Experimental Research in Synthetic Molecular Communications - Part II IEEE Nanotechnology Magazine 2023 ), S. 1-12 ISSN: 1942-7808 10.1109/MNANO.2023.3262377 Lu Z. , Wu W. , Drummer D. , Wang Y. , Liu C. , Li S. , Zhao X. :ZnO nanowire-decorated Al2O3/graphene aerogel for improving the thermal conductivity of epoxy composites Polymer Composites 2023 )10.1002/pc.27313 Ma Z. , Jiang B. , Dong Y. , Qiang J. , Drummer D. , Zhang L. :Electrodeposition model with dynamic ion diffusion coefficients for predicting void defects in electroformed microcolumn arrays Physical Chemistry Chemical Physics 2023 )ISSN: 1463-9076 10.1039/d2cp05396a Marschall M. , Cholewa S. , Kopp SP. , Drummer D. , Schmidt M. :Holistic Characterization of PBF-LB/P Powder Regarding Isothermal Crystallization, Rheology and Optical Properties Under Process Conditions In: Igor Drstvensek, Snehashis Pal, Nataša Ihan Hren (Hrsg.): Additive Manufacturing in Multidisciplinary Cooperation and Production Cham Springer 2023 , S. 43-52 ISBN: 9783031376702 10.1007/978-3-031-37671-9_5 Natale R. , Drummer D. :Improving the optical properties of achromatic lenses due to the process conditions Scholars 2nd Edition International Conference on Optics, Lasers and Photonics. 2023 (London Popp J. , Busch M. , Hausotte T. , Drummer D. :Fiber Orientation in continuous fiber reinforced thermoplastics/metal hybrid joining via multi-pin arrays Science and Engineering of Composite Materials 30 2023 )ISSN: 0334-181X 10.1515/secm-2022-0165 https://www.degruyter.com/document/doi/10.1515/secm-2022-0165/html Popp J. , Wolf M. , Drummer D. :Fügen thermoplastischer Faserverbunde über Pin-Strukturen mit variablen Prozessrouten Werkstoffe in der Fertigung 2023 )ISSN: 0939-2629 Popp J. , Zirngibl C. , Schleich B. , Wartzack S. , Drummer D. :Influence of geometrical parameters of conic pin structures in thermoplastic composite/steel hybrid joining 20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU 2. April 2023 - 5. April 2023 )In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023 10.21741/9781644902417-15 Qiang J. , Jiang B. , Dong Y. , Yang L. , Drummer D. , Zhang L. :Tuning residual stress in electrodeposited nickel films via pulse current Surfaces and Interfaces 40 2023 ), Art.Nr.: 103038 ISSN: 2468-0230 10.1016/j.surfin.2023.103038 Romeis M. , Ehrngruber M. , Drummer D. :Prozessabhängigkeit der dielektrischen Eigenschaften im FFF von COC 28. Technomer Chemnitz 2023 (Chemnitz 9. November 2023 - 10. November 2023 )In: Tagungsband Technomer: 2023 Rösel U. , Drummer D. :Correlation between the Material System and the Magnetic Properties in Thermoset-Based Multipolar Ring Magnets Magnetism 3 2023 ), S. 226-244 ISSN: 2673-8724 10.3390/magnetism3030018 Rösel U. , Drummer D. :Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics Magnetism 3 2023 ), S. 71-89 ISSN: 2673-8724 10.3390/magnetism3010007 Rösel U. , Drummer D. :Rotor-integrierte Dauermagnete – Spritzguss in der Antriebstechnik VDI Fachtagung Spritzgießen Rösel U. , Kneidl M. , Franke J. , Drummer D. :Improving the integrated fabrication of insulation systems in electric drives by injection molding of thermosets due to processing conditions and slot design Polymers 2023 ), S. 1-20 ISSN: 2073-4360 10.3390/polym15051165 Schellenberger A. , Belli R. , Karsten J. , Lohbauer U. :On the robustness of the Single-Edge-Precracked-Beam (SEPB) method for fracture toughness testing of ceramic materials Engineering Fracture Mechanics 291 2023 ), Art.Nr.: 109527 ISSN: 0013-7944 10.1016/j.engfracmech.2023.109527 Schlicht S. , Cholewa S. , Drummer D. :Process-Structure-Property Interdependencies in Non-Isothermal Powder Bed Fusion of Polyamide 12 Journal of Manufacturing and Materials Processing 7 2023 ), Art.Nr.: 33 ISSN: 2504-4494 10.3390/jmmp7010033 Schlicht S. , Drummer D. :Accelerated Powder Bed Fusion of Polypropylene Using Superposed Fractal Exposure Strategies 8th International Conference on Additive Technologies (Maribor 19. April 2023 - 22. April 2023 )In: Additive Manufacturing in Multidisciplinary Cooperation and Production 2023 10.1007/978-3-031-37671-9_1 Schlicht S. , Drummer D. :Eutectic In Situ Modification of Polyamide 12 Processed through Laser-Based Powder Bed Fusion Materials 16 2023 ), Art.Nr.: 2050 ISSN: 1996-1944 10.3390/ma16052050 Schlicht S. , Drummer D. :Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene EMPOrIA - International Joint Conference 2023 (Aachen 16. Mai 2023 - 17. Mai 2023 )10.3390/jmmp7020063 Schlicht S. , Drummer D. :Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene Journal of Manufacturing and Materials Processing 7 2023 ), Art.Nr.: 63 ISSN: 2504-4494 10.3390/jmmp7020063 Schneider K. , Kleffel T. , Drummer D. :RF Welding of Dielectric Lossless Foam Particles by the Application of a Dielectric Heatable Coating with High Recycling Potential Polymers 15 2023 ), Art.Nr.: 3950 ISSN: 2073-4360 10.3390/polym15193950 Schubert D. , Rohrmoser A. , Herzog C. , Wolf M. , Hagenah H. , Merklein M. , Drummer D. :Influence of production process-induced surface topologies at varying roughness depths on the tribological properties of polyamide steel contact Journal of Polymer Engineering 43 2023 ), S. 187-197 ISSN: 0334-6447 10.1515/polyeng-2022-0231 Schubert D. , Wolf M. , Drummer D. :Interaction of tool and process design on the mechanical and tribological behaviour of an injection-moulded polyamide-steel gear set Polymer Testing 2023 ), S. 107982 ISSN: 0142-9418 10.1016/j.polymertesting.2023.107982 Schulik J. , Salehi S. , Boccaccini AR. , Schrüfer S. , Schubert DW. , Arkudas A. , Kengelbach-Weigand A. , Horch RE. , Schmid R. :Comparison of the Behavior of 3D-Printed Endothelial Cells in Different Bioinks Bioengineering 10 2023 ), Art.Nr.: 751 ISSN: 2306-5354 10.3390/bioengineering10070751 Tischer F. , Cholewa S. , Düsenberg B. , Drummer D. , Peukert W. , Schmidt J. :Polyamide 11 nanocomposite feedstocks for powder bed fusion via liquid-liquid phase separation and crystallization Powder Technology 424 2023 ), Art.Nr.: 118563 ISSN: 0032-5910 10.1016/j.powtec.2023.118563 Tomiak F. , Zitzmann M. , Drummer D. :A Multi-Material Flame-Retarding System Based on Expandable Graphite for Glass-Fiber-Reinforced PA6 Polymers 15 2023 ), Art.Nr.: 4100 ISSN: 2073-4360 10.3390/polym15204100 Tur B. , Gühring L. , Wendler O. , Schlicht S. , Drummer D. , Kniesburges S. :Effect of Ligament Fibers on Dynamics of Synthetic, Self-Oscillating Vocal Folds in a Biomimetic Larynx Model Bioengineering 10 2023 ), Art.Nr.: 1130 ISSN: 2306-5354 10.3390/bioengineering10101130 Wagemann P. , Wolf M. , Drummer D. :Vibration welding of crosslinked polyethylene Joining Plastics - Fügen von Kunststoffen 17 2023 ), S. 166-173 ISSN: 1864-3450 Werner J. , Drummer D. :Influence of particle geometry and size on the cell morphology of vacuum assisted rotationally molded foam Cellular Polymers Online First 2023 )ISSN: 0262-4893 10.1177/02624893231171662 https://journals.sagepub.com/doi/10.1177/02624893231171662 Wolf M. , Drummer D. :Structure formation in pin-like joining using vibration welding technology Journal of Advanced Joining Processes 2023 ), S. 100158 ISSN: 2666-3309 10.1016/j.jajp.2023.100158 Wolf M. , Drummer D. :Structuring step dependent characteristics in joining using pin-like structures in the vibration welding process International Polymer Processing 2023 )ISSN: 0930-777X 10.1515/ipp-2023-4419 Wolf M. , Drummer D. :Verformung pinartiger Strukturen im Fügeprozess zur Erzeugung formschlüssiger Multimaterialverbindungen Joining Plastics - Fügen von Kunststoffen 17 2023 )ISSN: 1864-3450 Wolf M. , Kleffel T. , Drummer D. :Functionalization of series components by joining laser-sintered with injection-molded parts: Weld seam characteristics in vibration welding Composites and Advanced Materials 32 2023 )ISSN: 2634-9833 10.1177/26349833231165320 Yuan S. , Zhou M. , Liu X. , Li Q. , Drummer D. , Jiang B. :Investigation of parameters and porous plug enhanced enrichment with field-amplified sample stacking in microchip Physics of Fluids 35 2023 )ISSN: 1070-6631 10.1063/5.0135314 Zhao X. , Wu W. , Drummer D. , Wang Y. , Cui S. , Liu C. , Lu Z. , Li S. , Chen Q. :SiC Nanowires Bridged Graphene Aerogels with a Vertically Aligned Structure for Highly Thermal Conductive Epoxy Resin Composites and Their Mechanism ACS Applied Electronic Materials 2023 )ISSN: 2637-6113 10.1021/acsaelm.3c00015 2022 Amesöder S. , Ehrenstein G. :Thermisch leitfahig modifizierte Funktionskunststoffe International Journal of Materials Research 94 2022 ), S. 606-609 ISSN: 1862-5282 10.1515/ijmr-2003-0105 Cholewa S. , Drummer D. :Crystallization behavior under process conditions in Powder Bed Fusion of polymers 12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU 4. September 2022 - 8. September 2022 )In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022 10.1016/j.procir.2022.08.108 Cholewa S. , Drummer D. :Prozessnahe simultane Bestimmung des Kristallisations- und Fließverhaltens von PA 12 im Lasersintern Rapid.Tech 3D Druck (Erfurt 17. Mai 2022 - 19. Mai 2022 )10.3139/9783446475281.004 Cholewa S. , Jaksch A. , Drummer D. :Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance SFF 2022 (Austin, Texas 25. Juli 2022 - 27. Juli 2022 )Drummer D. , Greiner S. , Grützmacher C. , Jiang F. , Kleffel T. , Romeis M. , Schlicht S. , Wolf M. :Neue Werkstoffe und Prozesse für die additive Fertigung Jahresmagazin Ingenieurwissenschaften 2022 )ISSN: 1618-8357 https://www.wak-kunststofftechnik.de/fileadmin/downloads/7_ueber-uns/Jahresmagazin_Kunststofftechnik_2022.pdf Fu L. , Zhang M. , Zhai Z. , Jiang F. :The influence of preheating temperature on the mechanical properties of injection-overmolded hybrid glass fiber reinforced thermoplastic composites Polymer Testing 105 2022 )ISSN: 0142-9418 10.1016/j.polymertesting.2021.107425 Greiner S. , Drummer D. :Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging 12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen 4. September 2022 - 8. September 2022 )In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022 10.1016/j.procir.2022.08.060 Herzog C. , Wolf M. , Drummer D. :In Situ Measured Tooth Flank Wear of Plastic Gears under Spectrum Loading Polymers 14 2022 ), S. 5239 ISSN: 2073-4360 10.3390/polym14235239 Herzog C. , Wolf M. , Schubert D. , Drummer D. :In situ investigation of the influence of varying load conditions on tooth deformation and wear of polymer gears Forschung Im Ingenieurwesen-Engineering Research 2022 )ISSN: 0015-7899 10.1007/s10010-022-00591-1 Jaksch A. , Cholewa S. , Drummer D. :Understanding geometry dependent part behavior of thin walled structures in powder bed fusion of polymers 12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU 4. September 2022 - 8. September 2022 )In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022 10.1016/j.procir.2022.08.109 Jaksch A. , Spinola M. , Cholewa S. , Pflug L. , Stingl M. , Drummer D. :Thin-Walled Part Properties in PBF-LB/P — Experimental Understanding and Nonlocal Material Model SFF 2022 (Austin, Texas 25. Juli 2022 - 27. Juli 2022 )10.26153/tsw/44659 Jiang F. , Drummer D. :Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing Polymers 14 2022 ), Art.Nr.: 759 ISSN: 2073-4360 10.3390/polym14040759 Jiang F. , Wörz A. , Romeis M. , Drummer D. :Analysis of UV-Assisted direct ink writing rheological properties and curing degree Polymer Testing 105 2022 ), Art.Nr.: 107428 ISSN: 0142-9418 10.1016/j.polymertesting.2021.107428 Jiang F. , Zhou M. , Drummer D. :Effects of Fumed Silica on Thixotropic Behavior and Processing Window by UV-Assisted Direct Ink Writing Polymers 14 2022 )ISSN: 2073-4360 10.3390/polym14153107 Meschut G. , Merklein M. , Brosius A. , Drummer D. , Fratini L. , Füssel U. , Gude M. , Homberg W. , Martins PAF. , Bobbert M. , Lechner M. , Kupfer R. , Gröger B. , Han D. , Kalich J. , Kappe F. , Kleffel T. , Köhler D. , Kuball CM. , Popp J. , Römisch D. , Troschitz J. , Wischer C. , Wituschek S. , Wolf M. :Review on mechanical joining by plastic deformation Journal of Advanced Joining Processes 2022 )ISSN: 2666-3309 10.1016/j.jajp.2022.100113 Ott C. , Drummer D. :In-situ leakage behavior of polymer-metal hybrids under mechanical load International Polymer Processing 2022 )ISSN: 0930-777X 10.1515/ipp-2022-4229 Ott C. , Drummer D. :Reducing component stress during encapsulation of electronics: a simulative examination of thermoplastic foam injection molding Journal of Polymer Engineering 2022 )ISSN: 0334-6447 10.1515/polyeng-2022-0150 Peng T. , Li L. , Zhou M. , Jiang F. :Concentration of Microparticles Using Flexural Acoustic Wave in Sessile Droplets Sensors 22 2022 ), Art.Nr.: 1269 ISSN: 1424-8220 10.3390/s22031269 Popp J. , Drummer D. :Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating Journal of Advanced Joining Processes 5 2022 ), Art.Nr.: 100084 ISSN: 2666-3309 10.1016/j.jajp.2021.100084 Popp J. , Drummer D. :Joining of steel/CFRT-hybrid parts via non-rotational symmetric cold formed pin structures Hybrid 2022 (Leoben 20. Juli 2022 - 22. Juli 2022 )Popp J. , Römisch D. , Merklein M. , Drummer D. :Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures Applied Sciences 12 2022 )ISSN: 2076-3417 10.3390/app12104962 Roth B. , Drummer D. :Druckabhängige Orientierungsrelaxation im dynamisch temperierten Spritzprägen Zeitschrift Kunststofftechnik 1 2022 ), S. 1-23 ISSN: 1864-2217 10.3139/o999.01012022 Roth B. , Frank R. , Kleffel T. , Schneider K. , Drummer D. :High-Precision Thin Wall Bipolar Plates for Fuel Cell Applications via Injection Compression Molding with Dynamic Mold Temperature Control Polymers 14 2022 ), Art.Nr.: 2799 ISSN: 2073-4360 10.3390/polym14142799 Rösel U. , Drummer D. :Possibilities in Recycling Magnetic Materials in Applications of Polymer-Bonded Magnets Magnetism 2 2022 ), S. 251-270 ISSN: 2673-8724 10.3390/magnetism2030019 Rösel U. , Drummer D. :Simulationsgestützte Auslegung eines Spritzgießwerkzeugs zur Herstellung von kunststoffgebundenen Dauermagneten auf Duroplast Basis Werkstoffe in der Fertigung 2022 ), S. 22-26 ISSN: 0939-2629 Rösel U. , Drummer D. :Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets Magnetism 2 2022 ), S. 211-228 ISSN: 2673-8724 10.3390/magnetism2030016 Rösel U. , Kneidl M. , Drummer D. , Franke J. :Possibilities of Integrated Fabrication of Insulation Systems in Electric Drives by Injection Molding of Thermosets Polymers 14 2022 ), S. 5352 ISSN: 2073-4360 10.3390/polym14245352 Schlicht S. , Greiner S. , Drummer D. :Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies Polymers 14 2022 ), Art.Nr.: 1428 ISSN: 2073-4360 10.3390/polym14071428 Schlicht S. , Jaksch A. , Drummer D. :Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers Polymers 14 2022 ), Art.Nr.: 885 ISSN: 2073-4360 10.3390/polym14050885 Schneider K. , Gothe B. , Drexler M. , Siltamaeki J. , Weiger H. , Seefried A. , Drummer D. :The effect of dielectric and thermal properties of plastic mold materials on the high frequency welding of three-dimensional foam components Polymer Engineering and Science 2022 )ISSN: 0032-3888 10.1002/pen.26112 Schubert D. , Herzog C. , Drummer D. :In Situ Test Rig for the Measurement of the Operating Characteristics of Polymer Gears Zeitschrift Kunststofftechnik 1 2022 ), S. 93-116 ISSN: 1864-2217 10.3139/O999.02022022 Tomiak F. , Drummer D. :The Impact of beta-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives Polymers 14 2022 )ISSN: 2073-4360 10.3390/polym14153168 Tomiak F. , Schneider K. , Schoeffel A. , Rathberger K. , Drummer D. :Expandable Graphite as a Multifunctional Flame-Retarding Additive for Highly Filled Thermal Conductive Polymer Formulations Polymers 14 2022 )ISSN: 2073-4360 10.3390/polym14081613 Tomiak F. , Schoeffel A. , Rathberger K. , Drummer D. :Expandable Graphite, Aluminum Diethylphospinate and Melamine Polyphosphate as Flame Retarding System in Glass Fiber-Reinforced PA6 Polymers 14 2022 )ISSN: 2073-4360 10.3390/polym14061263 Wittmann LM. , Drummer D. :Mechanical properties of thermoformed multilayer parts containing non thermoformable materials Journal of Plastic Film & Sheeting 2022 ), S. 875608792210939 ISSN: 8756-0879 10.1177/87560879221093977 Wittmann LM. , Drummer D. :Two Layer Sheets for Processing Post-Consumer Materials Polymers 14 2022 )ISSN: 2073-4360 10.3390/polym14081507 Wittmann LM. , Kaschta J. , Drummer D. :Biaxial Elongation Behavior in Partially Molted State of Two-Layer Sheets Containing Postconsumer Material Polymers 14 2022 ), S. 3172 ISSN: 2073-4360 10.3390/polym14153172 Wolf M. , Beiß T. , Drummer D. :Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien Konstruktion 2022 ), S. 70-74 ISSN: 0720-5953 Wolf M. , Beiß T. , Drummer D. :Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien Konstruktion 74 2022 ), S. 70-74 ISSN: 0720-5953 10.37544/0720-5953-2022-10-70 Wolf M. , Drummer D. :Filling Behavior in Joining Using Pin-like Structures Polymers 14 2022 ), S. 3083 ISSN: 2073-4360 10.3390/polym14153083 Wolf M. , Drummer D. :Separation of Multi-Material Polymer Combinations Produced by Joining Using Pin-like Structures Journal of Manufacturing and Materials Processing 6 2022 ), Art.Nr.: 13 ISSN: 2504-4494 10.3390/jmmp6010013 Wolf M. , Drummer D. :Weld peculiarities of infrared-welded joints between laser-sintered and injection-moulded components Joining Plastics - Fügen von Kunststoffen 16 2022 ), S. 166-173 ISSN: 1864-3450 Yuan S. , Jiang B. , Jiang F. , Drummer D. , Zhou M. :Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles International Journal of Heat and Mass Transfer 191 2022 )ISSN: 0017-9310 10.1016/j.ijheatmasstransfer.2022.122815 Yuan S. , Jiang B. , Peng T. , Zhou M. , Drummer D. :Investigation of efficient mixing enhancement in planar micromixers with short mixing length Chemical Engineering and Processing 171 2022 ), Art.Nr.: 108747 ISSN: 0255-2701 10.1016/j.cep.2021.108747 Yuan S. , Zhou M. , Peng T. , Li Q. , Jiang F. :An investigation of chaotic mixing behavior in a planar microfluidic mixer Physics of Fluids 34 2022 )ISSN: 1070-6631 10.1063/5.0082831 Zirngibl C. , Kügler P. , Popp J. , Bielak CR. , Bobbert M. , Drummer D. , Meschut G. , Wartzack S. , Schleich B. :Provision of cross-domain knowledge in mechanical joining using ontologies Production Engineering 2022 ), S. 327 - 338 ISSN: 0944-6524 10.1007/s11740-022-01117-y 2021 Deringer T. , Drummer D. :In situ curing and bonding of epoxy prepregs in epoxy thermoset injection molding International Journal of Advanced Manufacturing Technology 2021 )ISSN: 0268-3768 10.1007/s00170-021-07838-1 Drummer D. , Grützmacher C. , Kleffel T. , Lanzl L. , Rösel U. , Roth B. , Schneider K. , Tomiak F. , Wittmann LM. :Hochgefüllte Kunststoffe: Neue Potenziale durch den Einsatz von Füllstoffen zur gezielten Eigenschaftsmodifikation Jahresmagazin Ingenieurwissenschaften 2021 ), S. 38-45 ISSN: 1618-8357 https://institut-wv.de/wp-content/uploads/sites/9/2021/10/096-650_WAK-Kunststoff_2021_s.pdf Greiner S. , Jaksch A. , Cholewa S. , Drummer D. :Development of material-adapted processing strategies for laser sintering of polyamide 12 Advanced Industrial and Engineering Polymer Research 2021 )10.1016/j.aiepr.2021.05.002 Greiner S. , Jaksch A. , Drummer D. :Materialangepasste Prozessstrategien für das Lasersintern von Kunststoffen 27. Technomer - Fachtagung über Verarbeitung und Anwendung von Polymeren (Technische Universität Chemnitz 4. November 2021 - 5. November 2021 )Greiner S. , Schlicht S. , Drummer D. :Temperaturfeldhomogenisierung durch fraktale Belichtungsstrategien im Lasersintern von Kunststoffen Rapid.Tech (, 22. Juni 2021 - 23. Juni 2021 )In: Proceedings of the 17th Rapid.Tech Conference 2021 10.3139/9783446471733.015 Huang Z. , Wu W. , Drummer D. , Liu C. , Wang Y. , Wang Z. :Enhanced the thermal conductivity of polydimethylsiloxane via a three-dimensional hybrid boron nitride@silver nanowires thermal network filler Polymers 13 2021 ), S. 1-10 ISSN: 2073-4360 10.3390/polym13020248 Huang Z. , Wu W. , Drummer D. , Liu C. , Wang Y. , Wang Z. :Multi-contact hybrid thermal conductive filler Al2O3@AgNPs optimized three-dimensional thermal network for flexible thermal interface materials Journal of Applied Polymer Science 2021 )ISSN: 0021-8995 10.1002/app.50889 Jaksch A. , Hesse N. , Schmidt J. , Drummer D. :Selektives Laserstrahlschmelzen von Polyamid 12 - Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften Rapid.Tech 2021 (, 22. Juni 2021 - 23. Juni 2021 )In: Proceedings of the 17th Rapid.Tech Conference 2021 10.3139/9783446471733.002 Lanzl L. , Drummer D. :Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions Polymers 13 2021 ), Art.Nr.: 3144 ISSN: 2073-4360 10.3390/polym13183144 Liu C. , Wu W. , Drummer D. , Wang Y. , Chen Q. , Liu X. , Schneider K. :Significantly enhanced thermal conductivity of polymer composites via establishing double-percolated expanded graphite/multi-layer graphene hybrid filler network European Polymer Journal 160 2021 )ISSN: 0014-3057 10.1016/j.eurpolymj.2021.110768 Ott C. , Drummer D. :Low-stress over-molding of media-tight electronics using thermoplastic foam injection molding Polymer Engineering and Science 2021 )ISSN: 1548-2634 10.1002/pen.25672 Peng T. , Fan C. , Zhou M. , Jiang F. , Drummer D. , Jiang B. :Rapid Enrichment of Submicron Particles within a Spinning Droplet Driven by a Unidirectional Acoustic Transducer Analytical Chemistry 2021 )ISSN: 0003-2700 10.1021/acs.analchem.1c02914 Piott F. , Krämer A. , Lück A. , Hoffmann L. , Mitschang P. , Drummer D. :Increasing the performance of continuous compression moulding by local pressure adaption Advanced Manufacturing: Polymer and Composites Science 2021 )ISSN: 2055-0340 10.1080/20550340.2021.1888209 Popp J. , Kleffel T. , Drummer D. :Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins Joining Plastics - Fügen von Kunststoffen 2021 ), S. 177-183 ISSN: 1864-3450 Popp J. , Kleffel T. , Römisch D. , Papke T. , Merklein M. , Drummer D. :Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins Applied Composite Materials 2021 )ISSN: 0929-189X 10.1007/s10443-021-09892-0 Popp J. , Wolf M. , Mattner T. , Drummer D. :Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics Journal of Composites Science 5 2021 ), Art.Nr.: 239 ISSN: 2504-477X 10.3390/jcs5090239 Qiang J. , Jiang B. , Dong Y. , Roth B. , Jiang F. :Extension of the Stoney formula for the incremental stress of thin films Applied Physics Letters 118 2021 ), Art.Nr.: 091604 ISSN: 0003-6951 10.1063/5.0038257 Romeis M. , Drummer D. :A dyciandiamine-based methacrylate-epoxy dual-cure blend-system for stereolithography Polymers 13 2021 ), Art.Nr.: 3139 ISSN: 2073-4360 10.3390/polym13183139 Roth B. , Drummer D. :Isotropy of mechanical properties and environmental stress crack sensitivity in injection- and injection-compression molding of polystyrene with different mold temperature Polymer Engineering and Science 2021 ), S. 1-10 ISSN: 0032-3888 10.1002/pen.25793 Roth B. , Drummer D. :Pressure Equilibrium Time of a Cyclic-Olefin Copolymer Polymers 13 2021 ), Art.Nr.: 15 ISSN: 2073-4360 10.3390/polym13142309 Rothfelder R. , Lanzl L. , Selzam JH. , Drummer D. , Schmidt M. :Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing Journal of Materials Engineering and Performance 2021 )ISSN: 1059-9495 10.1007/s11665-021-06271-5 Römisch D. , Popp J. , Drummer D. , Merklein M. :Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking Production Engineering 2021 )ISSN: 0944-6524 10.1007/s11740-021-01093-9 Rösel U. , Drummer D. :Correlation between the Flow and Curing Behavior of Hard Magnetic Fillers in Thermosets and the Magnetic Properties Magnetism 2021 ), S. 37-57 ISSN: 2673-8724 10.3390/magnetism1010004 Rösel U. , Drummer D. :Injection Moulding of Multipolar Polymer-Bonded Magnets into Soft Magnetic Inserts for Rotors in Reluctance Motors Magnetism 2021 ), S. 3-21 ISSN: 2673-8724 10.3390/magnetism1010004 Rösel U. , Drummer D. , Köjer M. :Fertigung eines Spritzgießwerkzeuges zur Herstellung von Flusssperren aus kunststoffgebundenen Dauermagneten in einem Synchron-Reluktanzmotor Werkstoffe in der Fertigung 2021 )ISSN: 0939-2629 Schneider K. , Ott C. , Drummer D. :Simulative study of polymeric core-shell foam particles for the enlargement of the material portfolio in 3-D high-frequency welding Polymer Engineering and Science 2021 )ISSN: 0032-3888 10.1002/pen.25861 Schulte-Hubbert F. , Drummer D. , Hoffmann L. :Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity - Theory and Modelling International Polymer Processing 36 2021 ), S. 423-434 ISSN: 0930-777X 10.1515/ipp-2020-4020 Tomiak F. , Rathberger K. , Schoeffel A. , Drummer D. :Expandable Graphite for Flame Retardant PA6 Applications Polymers 13 2021 ), Art.Nr.: 2733 ISSN: 2073-4360 10.3390/polym13162733 Tomiak F. , Schoeffel A. , Rathberger K. , Drummer D. :A synergistic flame retardant system based on expandable graphite, aluminum (Diethyl-)polyphospinate and melamine polyphosphate for polyamide 6 Polymers 13 2021 ), Art.Nr.: 2712 ISSN: 2073-4360 10.3390/polym13162712 Wittmann LM. , Drummer D. :Multilayer sheets for thermoforming non thermoformable polymers Journal of Plastic Film & Sheeting 2021 )ISSN: 8756-0879 10.1177/87560879211037387 Wolf M. , Drummer D. :Design criteria for the pin-foot ratio for joining adhesion-incompatible polymers using pin-like structures in vibration welding process Journal of Polymer Engineering 2021 )ISSN: 0334-6447 10.1515/polyeng-2021-0199 Wu W. , Zeng K. , Zhao B. , Duan F. , Jiang F. :New Considerations on the Determination of the Apparent Shear Viscosity of Polymer Melt with Micro Capillary Dies Polymers 13 2021 )ISSN: 2073-4360 10.3390/polym13244451 2020 Deringer T. , Drummer D. :The influence of mold temperature on thermoset in-mold forming Journal of Polymer Engineering 2020 )ISSN: 0334-6447 10.1515/polyeng-2019-0322 Fleck A. , Wöllner T. :The Impact of Examples on Creativity: Gender Differences in Fixation Effects In: Brem A., Bican P., Wimschneider C. (Hrsg.): Gender Differences in Technology and Innovation Management - Insights from Experimental Research München De Gruyter Studies in Innovation and Entrepreneurship 2020 , S. 7-28 ISBN: 978-3-11-059079-1 10.1515/9783110593952-002 Greiner S. , Drummer D. :Infrared monitoring of modified hatching strategies for laser sintering of polymers 11th CIRP Conference on Photonic Technologies / LANE 2020 (, 6. September 2020 - 10. September 2020 )In: Procedia CIRP 2020 10.1016/j.procir.2020.09.018 Greiner S. , Jaksch A. , Drummer D. :Understanding Cylinder Temperature Effects in Laser Beam Melting of Polymers 1st International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020 (, 19. Mai 2020 - 20. Mai 2020 )In: Lecture Notes in Mechanical Engineering 2020 10.1007/978-3-030-70332-5_12 Heinl M. , Greiner S. , Wudy K. , Pobel C. , Rasch M. , Huber F. , Papke T. , Merklein M. , Schmidt M. , Körner C. , Drummer D. , Hausotte T. :Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts Measurement Science and Technology 31 2020 ), S. 1-14 ISSN: 1361-6501 10.1088/1361-6501/ab89e2 Hertle S. , Kleffel T. , Wörz A. , Drummer D. :Production of polymer-metal hybrids using extrusion-based additive manufacturing and electrochemically treated aluminum Additive Manufacturing 33 2020 ), Art.Nr.: 101135 ISSN: 2214-7810 10.1016/j.addma.2020.101135 Jiang F. , Drummer D. :Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC Polymers 12 2020 )ISSN: 2073-4360 10.3390/polym12051080 Knorr VL. , Setter R. , Rietzel D. , Wudy K. , Osswald T. :Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics Journal of Composites Science 4 2020 )ISSN: 2504-477X 10.3390/jcs4030136 Kugler S. , Cruz C. , Kech A. , Chang TC. , Osswald T. :Workflow for enhanced fiber orientation prediction of short fiber-reinforced thermoplastics SPE ANTEC 2020: Annual Technical Conference for Plastic Professionals (, 30. März 2020 - 5. Mai 2020 )In: Annual Technical Conference - ANTEC, Conference Proceedings 2020 Kugler S. , Lambert GM. , Cruz C. , Kech A. , Osswald TA. , Baird DG. :Efficient parameter identification for macroscopic fiber orientation models with experimental data and a mechanistic fiber simulation 35th International Conference of the Polymer Processing Society, PPS 2019 (Cesme-Izmir 26. Mai 2019 - 30. Mai 2019 )In: Fevzi Cakmak Cebeci, Yusuf Z. Menceloglu, Serkan Unal, Yakup Ulcer (Hrsg.): AIP Conference Proceedings 2020 10.1063/1.5142965 Kugler S. , Lambert GM. , Cruz C. , Kech A. , Osswald TA. , Baird DG. :Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data Polymer Composites 2020 )ISSN: 0272-8397 10.1002/pc.25553 Lanzl L. , Wudy K. , Drummer D. :The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting Polymer Testing 2020 )ISSN: 0142-9418 10.1016/j.polymertesting.2019.106313 Liu C. , Wu W. , Drummer D. , Shen W. , Wang Y. , Schneider K. , Tomiak F. :ZnO nanowire-decorated Al2O3hybrids for improving the thermal conductivity of polymer composites Journal of Materials Chemistry C 8 2020 ), S. 5380-5388 ISSN: 2050-7526 10.1039/c9tc06805h Mattner T. , Drummer D. :Analysis of Contributive Forces In Intra-Laminar Shear of Continuous Fiber Reinforced Thermoplastics ANTEC® 2020: The Virtual Edition Proceedings In: ANTEC® 2020: The Virtual Edition Proceedings 2020 Mattner T. , Popp J. , Kleffel T. , Gröschel C. , Drummer D. :High Speed Forming of Continuous Fiber Reinforced Thermoplastics Applied Composite Materials 2020 )ISSN: 0929-189X 10.1007/s10443-020-09794-7 Mattner T. , Wrensch M. , Drummer D. :Shear behavior of woven and non-crimp fabric based thermoplastic composites at near-processing conditions Composites Part B-Engineering 185 2020 ), Art.Nr.: 107761 ISSN: 1359-8368 10.1016/j.compositesb.2020.107761 Müller A. , Schubert D. , Drummer D. , Hausotte T. :Determination of the single point uncertainty of customized polymer gear wheels using structured-light scanning with various polygonization settings Journal of Sensors and Sensor Systems 9 2020 ), S. 51-60 ISSN: 2194-8771 10.5194/jsss-9-51-2020 Obst P. , Riedelbauch J. , Oehlmann P. , Rietzel D. , Launhardt M. , Schmölzer S. , Osswald TA. , Witt G. :Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties Additive Manufacturing 32 2020 ), Art.Nr.: 101002 ISSN: 2214-7810 10.1016/j.addma.2019.101002 Ott C. , Wolf M. , Drummer D. :Media-Tight Polymer-Polymer Assemblies By Means of Sintered Powder Layer in Assembly Injection Moulding Procedia Manufacturing 47 2020 ), S. 362-367 ISSN: 2351-9789 10.1016/j.promfg.2020.04.286 Qiang J. , Luo K. , Dong Y. , Jiang B. , Drummer D. , Roth B. :In Situ Stress Measurement of Ni Electrodeposition Using Lateral Shearing Interferometry Journal of The Electrochemical Society 167 2020 )ISSN: 0013-4651 10.1149/1945-7111/abcb78 Roth B. , Drummer D. :Anwendungsoptimierte Druckverfestigung Zeitschrift Kunststofftechnik 2020 2020 ), S. 108-132 ISSN: 1864-2217 10.3139/O999.01042020 Roth B. , Drummer D. :Application optimized compression induced solidification International Journal of Plastics Technology 16 2020 )ISSN: 0972-656X Roth B. , Wildner W. , Drummer D. :Compression-Induced Solidification Polymers 12 2020 ), Art.Nr.: 488 ISSN: 2073-4360 10.3390/polym12020488 Roth B. , Wildner W. , Drummer D. :Dynamic compression induced solidification Polymers 12 2020 ), Art.Nr.: 488 ISSN: 2073-4360 10.3390/polym12020488 Rösel U. , Drummer D. :Einfluss von Prozessparametern auf die Eigenschaften von Rotoren Fachtagung Leitfähige Kunststoffe des Kunststoffinstituts Lüdenscheid Schneider K. , Wudy K. , Drummer D. :Flame-retardant polyamide powder for laser sintering: Powder characterization, processing behavior and component properties Polymers 12 2020 ), Art.Nr.: 1697 ISSN: 2073-4360 10.3390/POLYM12081697 Schubert D. , Rohrmoser A. , Hagenah H. , Merklein M. , Drummer D. :Verschleißmodellierung am Beispiel einer Polyamid-Stahl-Getriebepaarung für das prozessorientierte Toleranzmanagement Summer School Toleranzmanagement (Erlangen 28. September 2020 - 28. September 2020 )In: Sandro Wartzack (Hrsg.): Beiträge zur 4. Summer School 2020 Soldner D. , Greiner S. , Burkhardt C. , Drummer D. , Steinmann P. , Mergheim J. :Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12 Additive Manufacturing 2020 )ISSN: 2214-7810 10.1016/j.addma.2020.101676 Thielen N. , Werner D. , Schmidt K. , Seidel R. , Reinhardt A. , Franke J. :A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing 43rd International Spring Seminar on Electronics Technology, ISSE 2020 (Demanovska Valley 14. Mai 2020 - 15. Mai 2020 )In: Proceedings of the International Spring Seminar on Electronics Technology 2020 10.1109/ISSE49702.2020.9121044 Tomiak F. , Schartel B. , Wolf M. , Drummer D. :Particle Size Related Effects of Multi-Component Flame-Retardant Systems in Poly(Butadiene Terephtalate) Polymers 12 2020 )ISSN: 2073-4360 10.3390/polym12061315 Topic N. , Kruppa S. , Drummer D. :Assistance Machine Function for BMC Injection Molding International Symposium on Plastics Technology (Aachen In: ADVANCES IN POLYMER PROCESSING 2020 , BERLIN 2020 10.1007/978-3-662-60809-8_15 Völkl H. , Steck P. , Franz M. , Wartzack S. :Kraftflussgerechte Fused Layer Modeling-Strukturen mit kurzfaserverstärktem Filament Konstruktion 2020 ), S. 76-82 ISSN: 0720-5953 Wang L. , Wu W. , Drummer D. :Construction of micro-thermal conductive network of self-assembled CNTs hybrids with 1D–0D structure Journal of Thermal Analysis and Calorimetry 2020 )ISSN: 1388-6150 10.1007/s10973-020-10291-z Wang Y. , Wu W. , Drummer D. , Liu C. , Shen W. , Tomiak F. , Schneider K. , Liu X. , Chen Q. :Highly thermally conductive polybenzoxazine composites based on boron nitride flakes deposited with copper particles Materials & Design 191 2020 ), Art.Nr.: 108698 ISSN: 0264-1275 10.1016/j.matdes.2020.108698 Wang Y. , Wu W. , Drummer D. , Liu C. , Tomiak F. , Schneider K. :Improvement of thermal conductivity and mechanical properties for polybenzoxazine composites via incorporation of epoxy resin and segregated structure Materials Research Express 7 2020 )ISSN: 2053-1591 10.1088/2053-1591/abb263 Wang Y. , Wu W. , Drummer D. , Liu C. , Tomiak F. , Schneider K. , Huang Z. :Achieving a 3D thermally conductive while electrically insulating network in polybenzoxazine with a novel hybrid filler composed of boron nitride and carbon nanotubes Polymers 12 2020 ), S. 1-18 ISSN: 2073-4360 10.3390/polym12102331 Werner J. , Vetter L. , Hertle S. , Wolf M. , Drummer D. :Air inclusions in the polymer melt functioning as intrinsic physical blowing agents for the generation of foams in rotational molding Cellular Polymers 2020 )ISSN: 0262-4893 10.1177/0262489320920070 Wittmann LM. , Kurth K. , Drummer D. :Elongation behaviour of filled semi-crystalline polymers in thermoforming Advances in Materials and Processing Technologies 6 2020 ), S. 647-660 ISSN: 2374-068X 10.1080/2374068X.2020.1734348 Wolf M. , Drummer D. :Influence of the Structuring-Tool Geometry on Form-Fit Joining by Use of Pin-Like Structures in Vibration Welding Procedia Manufacturing 47 2020 ), S. 375-382 ISSN: 2351-9789 10.1016/j.promfg.2020.04.292 Wolf M. , Drummer D. :Joining laser-sintered with injection-molded parts made of PA12 using infrared welding Polymer Engineering and Science 2020 )ISSN: 0032-3888 10.1002/pen.25596 Wolf M. , Werner J. , Drummer D. :Weld seam morphology and bond strength of infrared and vibration welded SLS parts of polyamide 12 as a function of the layer build-up direction and the welding process Additive Manufacturing 36 2020 ), Art.Nr.: 101451 ISSN: 2214-7810 10.1016/j.addma.2020.101451 Wudy K. , Drummer D. :Curing behavior of thermosets for the use in a combined selective laser sintering process of polymers 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 (Austin, TX 13. August 2018 - 15. August 2018 )In: Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 2020 Wölfel B. , Seefried A. , Allen V. , Kaschta J. , Holmes C. , Schubert DW. :Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing Polymers 2020 )ISSN: 2073-4360 10.3390/polym12091917 https://www.mdpi.com/2073-4360/12/9/1917 Zhou M. , Fu L. , Jiang F. , Jiang B. , Drummer D. :Atomistic investigation on the wetting behavior and interfacial joining of polymer-metal interface Polymers 12 2020 ), Art.Nr.: 1696 ISSN: 2073-4360 10.3390/POLYM12081696 Zou Z. , Wu W. , Wang Y. , Drummer D. :Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage Materials Research Express 7 2020 )ISSN: 2053-1591 10.1088/2053-1591/ab8584 Zou Z. , Wu W. , Wang Y. , Kern W. , Drummer D. :Influences of Morphology Controllable Alumina on the Thermal Conductivity of Composites of Silicone Rubber 形貌可控氧化铝对硅橡胶复合材料导热性能的影响 Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 36 2020 ), S. 128-134 and 141 ISSN: 1000-7555 10.16865/j.cnki.1000-7555.2020.0082 2019 Dechet M. , Goblirsch A. , Romeis S. , Zhao M. , Lanyi F. , Kaschta J. , Schubert DW. , Drummer D. , Peukert W. , Schmidt J. :Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation Chemical Engineering Science 197 2019 ), S. 11-25 ISSN: 0009-2509 10.1016/j.ces.2018.11.051 Dechet M. , Lanzl L. , Werner Y. , Drummer D. , Bück A. , Peukert W. , Schmidt J. :Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf Dechet M. , Lanzl L. , Wilden A. , Sattes MM. , Drummer D. , Peukert W. , Schmidt J. :Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf Deringer T. , Drummer D. :Reduction of overmolding of Thermoset In-Mould produced hybrid components SPE Antec (Detroit 18. März 2019 - 20. März 2019 )In: Proceedings of SPE ANTEC 2019 2019 Deringer T. , Kleffel T. , Drummer D. :Integrative manufacturing of thermoset injection molding components with continous fiber-reinforcement Zeitschrift Kunststofftechnik 15 2019 ), S. 169-187 ISSN: 1864-2217 10.3139/O999.03022019 Drummer D. , Greiner S. , Zhao M. , Wudy K. :A novel approach for understanding laser sintering of polymers Additive Manufacturing 27 2019 ), S. 379-388 ISSN: 2214-7810 10.1016/j.addma.2019.03.012 Fischer A. , Zhong Y. , Zhang L. , Wu W. , Drummer D. :Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride Fire and Materials 2019 )ISSN: 0308-0501 10.1002/fam.2753 Gierl B. , Drummer D. :Investigation of radiation crosslinking as performance enhancement for thermoplastic spur gears VDI Gears 2019 (München 18. September 2019 - 18. September 2019 )In: VDI-Berichte 2019 2019 Gierl B. , Hertle S. , Kleffel T. , Drummer D. :Micrometer accurate measurement of tooth wear Kunststoffe International 109 2019 ), S. 107-109 ISSN: 1862-4243 Gierl B. , Schubert D. , Wörz A. , Drummer D. (Hrsg.):Kunststoffe in tribologischen Systemen - Forschung an der FAU Erlangen-Nürnberg 2019 Greiner S. , Lanzl L. , Wudy K. , Drummer D. :A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers PPS (Polymer Processing Society) (Dresden 26. Juni 2017 - 29. Juni 2017 )In: AIP Conference Proceedings 2055 2019 10.1063/1.5084907 Greiner S. , Wudy K. , Wörz A. , Drummer D. :Thermographic investigation of laser-induced temperature fields in selective
laser beam melting of polymers Optics and Laser Technology 109 2019 ), S. 569-576 ISSN: 0030-3992 10.1016/j.optlastec.2018.08.010 Haug M. , Meyer C. , Reischl B. , Prölß G. , Vetter K. , Iberl J. , Nübler S. , Schürmann S. , Rupitsch S. , Heckel M. , Pöschel T. , Winter L. , Herrmann H. , Clemen CS. , Schröder R. , Friedrich O. :The MyoRobot technology discloses a premature biomechanical decay of skeletal muscle fiber bundles derived from R349P desminopathy mice Scientific Reports 9 2019 ), Art.Nr.: 10769 ISSN: 2045-2322 10.1038/s41598-019-46723-6 Hertle S. , Wörz A. , Drummer D. :Analyse der Temperaturführung in der roboterbasierten Materialextrusion mit Polypropylen 16th Rapid.Tech (Erfurt 25. Juni 2019 - 27. Juni 2019 )In: Proceedings of the 16th Rapid.Tech Conference 2019 10.3139/9783446462441.018 Jaksch A. , Wudy K. , Drummer D. :Interaktion der Ausgangspulverkennwerte und der Belichtungsparameter im selektiven Laserstrahlschmelzen von Kunststoffen auf resultierende Bauteileigenschaften 16th Rapid.Tech (Erfurt 25. Juni 2019 - 27. Juni 2019 )10.3139/9783446462441.020 Jiang B. , Zhu L. , Min L. , Li X. , Zhai Z. , Drummer D. :Characterization of microchannel replicability of injection molded electrophoresis microfluidic chips Polymers 11 2019 ), Art.Nr.: 608 ISSN: 2073-4360 10.3390/polym11040608 Kleffel T. , Frey P. , Merklein M. , Drummer D. :Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals Journal of Polymer Engineering 2019 )ISSN: 0334-6447 10.1515/polyeng-2019-0098 Kraus M. , Frey P. , Kleffel T. , Drummer D. , Merklein M. :Mechanical joining without auxiliary element by cold formed pins for multi-material-systems 22nd International ESAFORM Conference on Material Forming (ESAFORM 2019) (Vitoria-Gasteiz 8. Mai 2019 - 8. Mai 2019 )10.1063/1.5112570 Kurth K. , Drummer D. :Improvement of the Reproduction Accuracy of a Defined Pole Length of Injection Molded Encoder Wheels Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden 27. Juni 2017 - 29. Juni 2017 )In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS , MELVILLE 2019 10.1063/1.5084874 Lanyi F. , Wenzke N. , Kaschta J. , Schubert DW. :On the Determination of the Enthalpy of Fusion of α-Crystalline Isotactic Polypropylene Using Differential Scanning Calorimetry, X-Ray Diffraction, and Fourier-Transform Infrared Spectroscopy: An Old Story Revisited Advanced Engineering Materials 2019 ), Art.Nr.: 1900796 ISSN: 1438-1656 10.1002/adem.201900796 https://onlinelibrary.wiley.com/doi/full/10.1002/adem.201900796 Lanzl L. , Drummer D. :Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien 7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg 12. Dezember 2019 - 12. Dezember 2019 )In: Vom Pulver zum multifunktionalen Bauteil 2019 Lanzl L. , Wudy K. , Greiner S. , Drummer D. :Selective laser sintering of copper filled polyamide 12: powder properties and process behavior Polymer Composites 40 2019 ), S. 1801-1809 ISSN: 0272-8397 10.1002/pc.24940 Launhardt M. , Drummer D. :Determination of the fundamental dimension development in building direction for laser-sintered parts Journal of Polymer Engineering 39 2019 )ISSN: 0334-6447 10.1515/polyeng-2018-0204 Launhardt M. , Ebel N. , Kondruweit M. , Weyand M. , Volk T. , Drummer D. :Developing a patient individualized flexible silicone implant using SLS and vacuum die casting AIP Conference Proceedings 2055 2019 ), Art.Nr.: 140005 ISSN: 0094-243X 10.1063/1.5084908 Launhardt M. , Ebel N. , Kondruweit M. , Weyane M. , Volk T. , Drummer D. :Developing a Patient Individualized Flexible Silicone Implant using SLS and Vacuum Die Casting Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden 27. Juni 2017 - 29. Juni 2017 )In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS , MELVILLE 2019 10.1063/1.5084908 Mattner T. , Drummer D. :A new approach for assessing the deflection and bending properties of continuous fiber reinforced thermoplastics under processing conditions Polymer Testing 74 2019 ), S. 77-85 ISSN: 0142-9418 10.1016/j.polymertesting.2018.12.024 Müller A. , Metzner S. , Hausotte T. , Schubert D. , Drummer D. :Separation of locally determined work piece deviations and measurement uncertainties for structured-light scanning of customized polymer gear wheels 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 (Nürnberg 25. Juni 2019 - 26. Juni 2019 )In: AMA Service GmbH (Hrsg.): 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 2019 10.5162/sensoren2019/6.4.1 https://www.ama-science.org/proceedings/details/3467 Ott C. , Wolf M. , Kleffel T. , Drummer D. :Haftungsinkompatible Kunststoff-Kunststoff-Verbunde mit gesteigerter Mediendichtheit mittels aufgesinterter Mikrostrukturen Zeitschrift Kunststofftechnik 15 2019 ), S. 314-334 ISSN: 1864-2217 10.3139/o999.03042019 Riedle H. , Braunias K. , Mukai B. , Franke J. :Experimental Mechanical Examination of Artificial 3D Printed and Post Processed Vascular Silicone Models * In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2019 10.1109/EMBC.2019.8856888 Rohrmoser A. , Kiener C. , Schubert D. , Hagenah H. , Drummer D. , Merklein M. :Targeted influencing of the mission-relevant component properties of cold-forged gearwheels Konstruktion 2019 2019 ), S. 94-98 ISSN: 0720-5953 Rohrmoser A. , Kiener C. , Schubert DW. , Hagenah H. , Drummer D. , Merklein M. :Gezielte Beeinflussung der einsatzrelevanten Bauteileigenschaften kaltfließgepresster Zahnräder Konstruktion 2019 ), S. 94-98 ISSN: 0720-5953 Roth B. , Wildner W. , Drummer D. :Analysis of the processing-pressure dependent refractive index of polycarbonate by transmission measurements of glass-filled specimen Polymer Engineering and Science 2019 )ISSN: 0032-3888 10.1002/pen Roth B. , Zhou M. , Drummer D. :Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene International Polymer Processing 34 2019 ), S. 425-433 ISSN: 0930-777X 10.3139/217.3802 Schubert D. , Hertle S. , Drummer D. :Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern Konstruktion 03/19 2019 ), S. 75-81 ISSN: 0720-5953 Schubert D. , Hertle S. , Drummer D. :Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern Konstruktion 2019 2019 ), S. 75-81 ISSN: 0720-5953 10.37544/0720-5953-2019-03-75 Schubert D. , Hertle S. , Drummer D. :Influence of titanium oxide-based colourants on the morphological and tribomechanical properties of injection-moulded polyoxymethylene spur gears Journal of Polymer Engineering 2019 )ISSN: 0334-6447 10.1515/polyeng-2019-0170 Schubert D. , Hertle S. , Kleffel T. , Drummer D. :Development Of An Integrated Simulation Method For The Prediction Of Transmission Errors Of Injection Molded Spur Gears 22nd International Conference on Material Forming (ESAFORM 2019) (Vittoria-Gasteiz 8. Mai 2019 - 8. Mai 2019 )10.1063/1.5112663 Schubert D. , Hertle S. , Kleffel T. , Drummer D. :Development of a simulation method for the prediction of transmission errors of injection molded spur gears 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz 8. Mai 2019 - 10. Mai 2019 )In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019 10.1063/1.5112663 Schubert D. , Rohrmoser A. , Hagenah H. , Merklein M. , Drummer D. :Einfluss der fertigungsbedingten Gestalt und Struktur auf das Einlaufverhalten von Stahl-Kunststoff-Getriebepaarungen Industriekolloquium der Forschergruppe FOR 2271 (Erlangen In: Industriekolloquium der Forschergruppe FOR 2271 2019 Schubert D. , Rohrmoser A. , Hertle S. , Wartzack S. , Hagenah H. , Merklein M. , Drummer D. :New Approach on the Allocation of Wear Allowances - a Case Study 22nd International Conference on Engineering Design (ICED19) (Delft 5. August 2019 - 8. August 2019 )10.1017/dsi.2019.358 Schubert D. , Rohrmoser A. , Merklein M. , Drummer D. :Effect of Surface Structure on Run-in Wear in Steel-Polyamide Gear Sets Zeitschrift Kunststofftechnik 15 2019 ), S. 370-391 ISSN: 1864-2217 10.3139/O999.03052019 Ullmer A. , Kleffel T. , Zhai Z. , Mattner T. , Drummer D. :A Practical Approach for Validation of Aptitude of Sized Carbon Fibers for the In-Mould -Impregnation Process American Journal of Mechanical and Materials Engineering 3 2019 ), S. 11-19 ISSN: 2639-9628 10.11648/j.ajmme.20190301.12 Vetter L. , Werner J. , Wolf M. , Hertle S. , Drummer D. :Influence of Vacuum on the Porosity and Mechanical Properties in Rotational Molding Polymer Engineering and Science 2019 )ISSN: 0032-3888 10.1002/pen.25152 Wang L. , Wu W. , Drummer D. , Ma R. , Liu Z. , Shen W. :Study on thermal conductive PA6 composites with 3-dimensional structured boron nitride hybrids Journal of Applied Polymer Science 136 2019 )ISSN: 0021-8995 10.1002/app.47630 Wang L. , Wu W. , Zou Z. , Liu J. , Fischer A. , Drummer D. :Effects of CNTs/BN Hybrids on the Thermal Conductivity of PA6 Composite and Its Mechanism 碳纳米管/氮化硼混杂填料对尼龙6导热性能的影响及其机理 Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 35 2019 ), S. 42-47 ISSN: 1000-7555 10.16865/j.cnki.1000-7555.2019.0069 Wittmann LM. , Fischer D. , Drummer D. :Radiation Crosslinking of Films - New Applications in the Thermoforming of Filled Materials Kunststoffe International 10/2019 2019 ), S. 112-116 ISSN: 1862-4243 Wittmann LM. , Fischer D. , Drummer D. :Strahlenvernetzung von Folien - Neue Anwendungen bei der Verarbeitung gefüllter Materialien im Thermoformprozess Kunststoffe 10/2019 2019 ), S. 176-179 ISSN: 0023-5563 Wittmann LM. , Wolf M. , Drummer D. :Influence of an Increased Fiber Filler Content on the Elongational Behaviour of Filled Films in the Thermoforming Process American Journal of Mechanical and Materials Engineering 3 2019 ), S. 25-35 ISSN: 2639-9628 10.11648/j.ajmme.20190302.11 Wittmann LM. , Wolf M. , Kurth K. , Drummer D. :Influence of radiation-crosslinking on the elongation behaviour of glass-fibre-filled sheets in the thermoforming process Journal of Polymer Engineering 2019 )ISSN: 0334-6447 10.1515/polyeng-2019-0050 Wolf M. , Hertle S. , Drummer D. :Influence of the thermomechanical properties on the joining of adhesion incompatible polymers by form-fit using the vibration welding process eXPRESS Polymer Letters 13 2019 ), S. 365-378 ISSN: 1788-618X 10.3144/expresspolymlett.2019.30 Wudy K. , Budde T. :Reaction kinetics and curing behavior of epoxies for use in a combined selective laser beam melting process of polymers Journal of Applied Polymer Science 136 2019 ), Art.Nr.: 46850 ISSN: 0021-8995 10.1002/app.46850 Wudy K. , Drummer D. :Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties Additive Manufacturing 25 2019 )ISSN: 2214-7810 10.1016/j.addma.2018.11.007 Wudy K. , Schmidt J. , Lanzl L. , Zhao M. , Jaksch A. , Dechet M. , Hesse N. , Drummer D. , Peukert W. :Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization 7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg 12. Dezember 2019 - 12. Dezember 2019 )In: Dietmar Drummer (Hrsg.): Vom Pulver zum multifunktionalen Bauteil 2019 Wörz A. , Drummer D. :Untersuchung zur Bedeutung der Schichtanzahl für Struktur und Eigenschaften von LS-Kunststoffbauteilen Technomer 2019 (Chemnitz 7. November 2019 - 8. November 2019 )Wörz A. , Hertle S. , Drummer D. :Mechanisches Verhalten lasergesinterter PA12 Bauteile bei variierenden statischen Belastungsgeschwindigkeiten und -dauern 16th Rapid.Tech (Erfurt 25. Juni 2019 - 27. Juni 2019 )In: Proceedings of the 16th Rapid.Tech Conference 2019 10.3139/9783446462441.013 Wörz A. , Wiedau L. , Wudy K. , Wegner A. , Witt G. , Drummer D. :Influence of chemical postprocessing on mechanical properties of laser-sintered polyamide 12 parts Journal of Polymer Engineering 2019 )ISSN: 0334-6447 10.1515/polyeng-2019-0110 Wörz A. , Wudy K. , Drummer D. :Understanding the influence of energy-density on the layer-dependent part properties in laser-sintering of PA12 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, Texas In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 Wörz A. , Wudy K. , Drummer D. , Heidebrecht M. , Klein S. :Processing LDS-Circuit Boards by Selective Laser Sintering International Polymer Processing 34 2019 ), S. 248-254 ISSN: 0930-777X 10.3139/217.3670 Yi W. , Wu W. , Drummer D. , Shen W. , Chao L. , Ning W. :Synergistic construction of thermally conductive network in polybenzoxazine with boron nitride hybrid fillers Materials Research Express 6 2019 )ISSN: 2053-1591 10.1088/2053-1591/ab6e7d Zhang M. , Jiang B. , Chen C. , Drummer D. , Zhai Z. :The effect of temperature and strain rate on the interfacial behavior of glass fiber reinforced polypropylene composites: A molecular dynamics study Polymers 11 2019 ), Art.Nr.: 1766 ISSN: 2073-4360 10.3390/polym11111766 Zhao Y. , Drummer D. :Influence of filler content and filler size on the curing kinetics of an epoxy resin Polymers 11 2019 ), Art.Nr.: 1797 ISSN: 2073-4360 10.3390/polym11111797 Zhao Y. , Mattner T. , Drummer D. :Investigation of the effects of pre-cross-linked thermoset molding compounds on weld line strength in injection molding International Journal of Advanced Manufacturing Technology 2019 )ISSN: 0268-3768 10.1007/s00170-019-04306-9 Zhou M. , Xiong X. , Drummer D. , Jiang B. :Interfacial interaction and joining property of direct injection-molded polymer-metal hybrid structures: A molecular dynamics simulation study Applied Surface Science 478 2019 ), S. 680-689 ISSN: 0169-4332 10.1016/j.apsusc.2019.01.286 Zhou M. , Xiong X. , Drummer D. , Jiang B. :Molecular Dynamics Simulation on the Effect of Bonding Pressure on Thermal Bonding of Polymer Microfluidic Chip Polymers 11 2019 )ISSN: 2073-4360 10.3390/polym11030557 Zhu L. , Min L. , Li X. , Zhai Z. , Drummer D. , Jiang B. :Effects of process conditions on the heat transfer coefficient at the polymer-mold interface and tensile strength of thin-wall injection molding parts Journal of Polymer Engineering 2019 )ISSN: 0334-6447 10.1515/polyeng-2018-0369 2018 Dechet M. , Gomez Bonilla JS. , Lanzl L. , Drummer D. , Bück A. , Schmidt J. , Peukert W. :Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding Polymers 10 2018 ), Art.Nr.: 1373 ISSN: 2073-4360 10.3390/polym10121373 Dechet M. , Zhao M. , Drummer D. , Peukert W. , Schmidt J. :Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg 12. Dezember 2019 - 12. Dezember 2019 )In: Dietmar Drummer (Hrsg.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung , Erlangen 2018 Drexler M. , Greiner S. , Lexow M. , Lanzl L. , Wudy K. , Drummer D. :Selective laser melting of polymers: Influence of powder coating on mechanical part properties Journal of Polymer Engineering 38 2018 ), S. 667-674 ISSN: 0334-6447 10.1515/polyeng-2017-0133 Drummer D. , Wudy K. :Additive Fertigung mit Kunststoffen: Potenziale, Entwicklungen und Trends In: Spritzgießen 2018 VDI Verlag GMBH 2018 , S. 53-64 (VDI Berichte) Fischer A. , Kuhn T. , Drummer D. , Franke J. :Effect of talc on the metal adhesion of laser-structured polymer parts 13th International Congress Molded Interconnect Devices (Würzburg 26. September 2018 - 26. September 2018 )10.1109/icmid.2018.8666940 Fischer C. , Jungmeier A. , Peters G. , Drummer D. :Influence of a locally variable mold temperature on injection molded thin-wall components Journal of Polymer Engineering 38 2018 ), S. 475-481 ISSN: 0334-6447 10.1515/polyeng-2017-0100 Greiner S. , Lanzl L. , Zhao M. , Wudy K. , Drummer D. :Influence of powder bed surface on part properties produced by selective laser beam melting of polymers 7th International Conference on Additive Technologies - iCAT 2018 (Maribor 10. Oktober 2018 - 11. Oktober 2018 )In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018 Greiner S. , Soldner D. , Jaksch A. , Zhao M. , Mergheim J. , Steinmann P. , Wudy K. , Drummer D. :Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen 6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg 13. Dezember 2018 - 13. Dezember 2018 )Heinle M. , Frey P. , Merklein M. , Drummer D. :Einfluss mikrogeformter Kanten an Metalleinlegern auf die Temperaturwechselbeständigkeit mediendichter Kunststoff-Metall-Hybriden Zeitschrift Kunststofftechnik 14 2018 ), S. 211-232 ISSN: 1864-2217 10.3139/o999.03032018 Hertle S. , Lass A. , Wurm FH. , Drummer D. :Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - creep modelling fan 2018 (Darmstadt 18. April 2018 - 20. April 2018 )Hertle S. , Mattner T. , Drummer D. :Berücksichtigung des Druckniveaus bei der Viskositätsermittlung im Hochdruckkapillarrheometer 9. CONNECT! European Moldflow User Meeting 2018 (Frankfurt 5. Juni 2018 - 6. Juni 2018 )Jaksch A. , Hesse N. , Drummer D. , Schmidt J. :Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers 6. Industriekolloquium des SFB 814 (Nürnberg 13. Dezember 2018 - 13. Dezember 2018 )In: 6. Industriekolloquium des SFB 814, 2018 Jiang L. , Jiang B. , Wu W. , Zhu L. , Drummer D. :Research on thermal contact resistance between polymer and mold during thin-wall injection molding 薄壁注射成型中聚合物与模具间接触热阻研究 Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) 49 2018 ), S. 1381-1386 ISSN: 1672-7207 10.11817/j.issn.1672-7207.2018.06.010 Kleffel T. , Drummer D. :Electrochemical treatment of metal inserts for subsequent assembly injection molding of tight electronic systems Journal of Polymer Engineering 2018 )ISSN: 0334-6447 10.1515/polyeng-2017-0432 Kleffel T. , Drummer D. :One-step Electrochemical Treatment of Metal Inserts for Tight Polymer-Metal Hybrid Applications SPE Antec 2018 (Orlando Lanzl L. , Greiner S. , Wudy K. , Drummer D. :Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties 7th International Conference on Additive Technologies - iCAT2018 (Maribor 10. Oktober 2018 - 11. Oktober 2018 )In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018 Lass A. , Hertle S. , Drummer D. , Wurm FH. :Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - numerical and experimental approach fan 2018 (Darmstadt 18. April 2018 - 20. April 2018 )Lexow M. , Heller B. , Maier F. , Steinrück HP. :Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111) ChemPhysChem 19 2018 ), S. 2978-2984 ISSN: 1439-4235 10.1002/cphc.201800773 Mattner T. , Drummer D. :Usability of dielectric properties for evaluation and research of deconsolidation of endless fiber-reinforced thermoplastics Journal of Polymer Engineering 38 2018 )ISSN: 0334-6447 10.1515/polyeng-2017-0395 Mattner T. , Körbel W. , Wrensch M. , Drummer D. :Compensation of edge effects in picture frame testing of continuous fiber reinforced thermoplastics Composites Part B-Engineering 142 2018 ), S. 95-101 ISSN: 1359-8368 10.1016/j.compositesb.2018.01.009 Obst P. , Launhardt M. , Drummer D. , Osswald P. , Osswald T. :Failure criterion for PA12 SLS additive manufactured parts Additive Manufacturing 21 2018 ), S. 619-627 ISSN: 2214-7810 10.1016/j.addma.2018.04.008 Osmanlic F. , Wudy K. , Laumer T. , Schmidt M. , Drummer D. , Körner C. :Modeling of Laser Beam Absorption in a Polymer Powder Bed Polymers 10 2018 )ISSN: 2073-4360 10.3390/polym10070784 Riedle H. , Mukai B. , Molz P. , Franke J. :Determination of the Mechanical Properties of Aortic Tissue for 3D Printed Surgical Models 2018 11th Biomedical Engineering International Conference (BMEiCON) (Chiang Mai 21. November 2018 - 24. November 2018 )In: BMEiCON - 2018 , [Piscataway, New Jersey] 2018 10.1109/BMEiCON.2018.8609983 Topic N. , Kruppa S. , Drummer D. , Schiffers R. :Stabilization of BMC injection molding by process control measures 2018 Society of Plastics Engineers Annual Technical Conference, ANTEC 2018 (Orlando, FL, USA 7. Mai 2018 - 10. Mai 2018 )In: Annual Technical Conference - ANTEC, Conference Proceedings 2018 Wang L. , Zhang L. , Fischer A. , Zhong Y. , Drummer D. , Wu W. :Enhanced thermal conductivity and flame retardancy of polyamide 6/flame retardant composites with hexagonal boron nitride Journal of Polymer Engineering 2018 )ISSN: 0334-6447 10.1515/polyeng-2017-0414 Wildner W. , Drummer D. :Analysis of the processing-pressure dependent refractive index of Poly(methyl methacrylate) by transmission measurements of glass-filled specimen Polymer Testing 71 2018 ), S. 217-222 ISSN: 0142-9418 10.1016/j.polymertesting.2018.09.011 Wildner W. , Drummer D. :Light scattering and optical performance of glass-particle filled matrices with similar refractive index Journal of Composite Materials 52 2018 )ISSN: 0021-9983 10.1177/0021998318778889 Wildner W. , Drummer D. :Light scattering of glass-particle filled matrices with similar refractive index Journal of Composite Materials 2018 )ISSN: 0021-9983 10.1177/0021998318778889 Wildner W. , Drummer D. :Nanofiller materials for transparent polymer composites: Influences on the properties and on the transparency—A review Journal of Thermoplastic Composite Materials 2018 ), S. 1-19 ISSN: 0892-7057 10.1177/0892705718797157 Wittmann LM. , Kleffel T. , Mattner T. , Drummer D. :Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites International Polymer Processing 33 2018 ), S. 706-713 ISSN: 0930-777X 10.3139/217.3518 Wolf M. , Launhardt M. , Drummer D. :Untersuchung zum Vibrationsschweißen von laserstrahlgesinterten Bauteilen Joining Plastics - Fügen von Kunststoffen 01 2018 ), S. 22-28 ISSN: 1864-3450 Wudy K. , Drexler M. , Lanzl L. , Drummer D. :Analysis of time dependent thermal properties for high rates in selective laser sintering Rapid Prototyping Journal 24 2018 ), S. 894-900 ISSN: 1355-2546 10.1108/RPJ-01-2017-0013 Wudy K. , Drummer D. :Curing beharior of thermosets for the use in a combined selective laser sintering process 9th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin 13. August 2018 - 15. August 2018 )In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2018 Wudy K. , Drummer D. :Infiltration Behavior of Thermosets for Use in a Combined
Selective Laser Sintering Process of Polymers JOM Journal of the Minerals, Metals and Materials Society 2018 ), S. 1-8 ISSN: 1047-4838 10.1007/s11837-018-3226-0 Wudy K. , Greiner S. , Zhao M. , Drummer D. :Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization Procedia CIRP 74 2018 ), S. 238-243 ISSN: 2212-8271 10.1016/j.procir.2018.08.102 Wörz A. , Drummer D. :Tribological anisotropy of selective laser sintered PA12 parts Polymer Testing 70 2018 ), S. 117-126 ISSN: 0142-9418 10.1016/j.polymertesting.2018.06.028 Wörz A. , Drummer D. :Understanding hatch-dependent part properties in SLS International Solid Freeform Fabrication Symposium (Austin 13. August 2018 - 15. August 2018 )In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium 2018 Wörz A. , Wudy K. , Drummer D. :Einfluss des Schichtaufbaus auf das mechanische Verhalten von selektiv lasergesinterten Bauteilen Rapid Tech 2018 (Erfurt 5. Juni 2018 - 7. Juni 2018 )10.3139/9783446458123.016 Zhai Z. , Jiang B. , Drummer D. :Nonlinear material model for quasi-unidirectional woven composite accounting for viscoelastic, viscous deformation, and stiffness reduction Polymers 10 2018 ), Art.Nr.: 903 ISSN: 2073-4360 10.3390/polym10080903 Zhai Z. , Jiang By. , Drummer D. :Strain rate-dependent mechanical behavior of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading Polymer Testing 69 2018 ), S. 276-285 ISSN: 0142-9418 10.1016/j.polymertesting.2018.05.033 Zhai Z. , Jiang By. , Drummer D. :Temperature-dependent response of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading Composites Part B-Engineering 148 2018 ), S. 180-187 ISSN: 1359-8368 10.1016/j.compositesb.2018.04.058 Zhai Z. , Jiang By. , Drummer D. :Tensile Creep Behavior of Quasi-Unidirectional E-Glass Fabric Reinforced Polypropylene Composite Polymers 10 2018 )ISSN: 2073-4360 10.3390/polym10060661 Zhang L. , Wang L. , Fischer A. , Wu W. , Drummer D. :Effect of graphite on the flame retardancy and thermal conductivity of P-N flame retarding PA6 Journal of Applied Polymer Science 2018 )ISSN: 0021-8995 10.1002/APP.46559 Zhao M. , Greiner S. , Wudy K. , Schmidt J. , Peukert W. , Drummer D. :Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie Rapid Tech (Erfurt 5. Juni 2018 - 7. Juni 2018 )In: Proceedings of the 15th Rapid.Tech Conference 2018 10.3139/9783446458123.019 Zhao M. , Wudy K. , Drummer D. :Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering Polymers 10 2018 )ISSN: 2073-4360 10.3390/polym10020168 Zhao Y. , Zhai Z. , Drummer D. :Thermal conductivity of aluminosilicate- and aluminum oxide-filled thermosets for injection molding: Effect of filler content, filler size and filler geometry Polymers 10 2018 ), Art.Nr.: 457 ISSN: 2073-4360 10.3390/polym10040457 Zhou M. , Xiong X. , Drummer D. , Jiang B. :Molecular dynamics simulation and experimental investigation of the geometrical morphology development of injection-molded nanopillars on polymethylmethacrylate surface Computational Materials Science 149 2018 ), S. 208-216 ISSN: 0927-0256 10.1016/j.commatsci.2018.03.035 2017 Braun T. , Greiner S. , Baierl U. , Drummer D. , Franke J. :Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie PLUS - Produktion von Leiterplatten und Systemen 19 2017 ), S. 985-1144 Braun T. , Greiner S. , Diepgen A. , Schröppel K. , Drummer D. , Franke J. :ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii 6. Februar 2017 - 9. Februar 2017 )In: IEEE (Hrsg.): Proceedings of the SMTA Pan Pacific Microelectronics Symposium, 2017 2017 Deringer T. , Gröschel C. , Drummer D. :Influence of mold temperature and process time on the degree of cure of epoxy-based materials for thermoset injection molding and prepreg compression molding Journal of Polymer Engineering 2017 )ISSN: 0334-6447 10.1515/polyeng-2016-0409 Diermeier S. , Iberl J. , Vetter K. , Haug M. , Pollmann C. , Reischl B. , Buttgereit A. , Schürmann S. , Spörrer M. , Goldmann W. , Fabry B. , Elhamine F. , Stehle R. , Pfitzer G. , Winter L. , Clemen CS. , Herrmann H. , Schröder R. , Friedrich O. :Early signs of architectural and biomechanical failure in isolated myofibers and immortalized myoblasts from desmin-mutant knock-in mice Scientific Reports 7 2017 ), S. 1391 ISSN: 2045-2322 10.1038/s41598-017-01485-x Drummer D. , Fischer A. , Ranft F. , Heinle C. , Amesöder S. , Lober A. :Thermally Conductive Polymers Meet LED Kunststoffe International 2017 2017 ), S. 21-24 ISSN: 1862-4243 Drummer D. , Fischer A. , Ranft F. , Heinle C. , Amesöder S. , Lober A. :Wärmeleitender Kunststoff trifft LED Kunststoffe 1 2017 ), S. 38-41 ISSN: 0023-5563 Fischer A. , Kuhn T. , Müller H. , Drummer D. , Franke J. , Zimmermann A. :Effect of flow lines on the metallization of laser structured polymer parts SPE Antec 2017 (Anaheim 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec 2017 Fischer A. , Meister S. , Drummer D. :Effect of fillers on the metallization of laser-structured polymer parts Journal of Polymer Engineering 37 2017 ), S. 151-161 ISSN: 0334-6447 Fischer C. , Drummer D. :Einfluss der Werkzeugtemperatur auf die lokale Ausbildung der Bauteileigenschaften beim dynamisch temperierten Mikrospritzguss 8. Kolloquium Mikroproduktion (Bremen 27. November 2017 - 28. November 2017 )In: 8. Kolloquium Mikroproduktion 2017 Fischer C. , Drummer D. :Micro Components with Locally Different Properties Realized by Segmented Tempered Injection Molding SPE Antec (Anaheim 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec , Anaheim 2017 Fischer C. , Seefried A. , Drummer D. :Crystallization and Component Properties of Polyamide 12 at Processing-Relevant Cooling Conditions Polymer Engineering and Science 57 2017 ), S. 450-457 ISSN: 0032-3888 10.1002/pen.24441 Fischer C. , Seefried A. , Merle B. , Göken M. , Drummer D. :Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time Polymer Engineering and Science 57 2017 ), S. 121-128 ISSN: 0032-3888 10.1002/pen.24394 Goris S. , Back T. , Yanev A. , Brands D. , Drummer D. , Osswald T. :A novel fiber length measurement technique for discontinuous fiber-reinforced composites: A comparative study with existing methods Polymer Composites 2017 )ISSN: 1548-0569 10.1002/pc.24466 Greiner S. , Kurth K. , Fix C. , Braun T. , Franke J. , Drummer D. :Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts Journal of Ceramic Science and Technology 08 2017 ), S. 227-286 ISSN: 2190-9385 10.4416/JCST2017-00009 Greiner S. , Lanzl L. , Wudy K. , Drexler M. , Drummer D. :Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen Rapid Tech 2017 (Erfurt 20. Juni 2017 - 22. Juni 2017 )In: Proceedings of Rapid Tech 2017 2017 Greiner S. , Wudy K. , Lanzl L. , Drummer D. :Selective laser sintering of polymer blends: Bulk properties and process behavior Polymer Testing 64 2017 ), S. 136-144 ISSN: 0142-9418 10.1016/j.polymertesting.2017.09.039 Gröschel C. , Drummer D. :Forming of thermoplastic matrix composites with gas pressure - the influence of blank holder and sheet temperature on the forming pressure and drawing ratio International Polymer Processing 32 2017 ), S. 194-202 ISSN: 0930-777X 10.3139/217.3298 Hertle S. , Drummer D. :Einfluss der druckabhängigen Viskosität auf die Spritzgusssimulation kurzfaserverstärkter Thermoplaste Technomer 2017 (Chemnitz 10. November 2017 - 10. November 2017 )Hinze M. , Ranft F. , Drummer D. , Schwieger W. :Reduction of the heat capacity in low-temperature adsorption chillers using thermally conductive polymers as heat exchangers material Energy Conversion and Management 145 2017 ), S. 378-385 ISSN: 0196-8904 10.1016/j.enconman.2017.05.011 Kleffel T. , Drummer D. :Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion Composites Part B-Engineering 117 2017 ), S. 20-25 ISSN: 1359-8368 10.1016/j.compositesb.2017.02.042 Kleffel T. , Drummer D. , Kuhmann K. :Adhesion promoter for unequal pairs Kunststoffe International 107 2017 ), S. 80-83 ISSN: 1862-4243 Kleffel T. , Drummer D. , Kuhmann K. :Vermittler für ungleiche Paare Kunststoffe International 2017 ), S. 199-203 ISSN: 1862-4243 Kreis O. , Drummer D. :Department Maschinenbau - Forschung. Lehre. Transfer / Department of Mechanical Engineering – Research. Education. Transfer 2017 )https://www.department.mb.tf.fau.de/files/2017/03/MB_Departmentbroschuere_2017.pdf Kurth K. , Drummer D. :Effect of the variation of the gating system on the magnetic properties of injection molded pole-oriented rings Journal of Polymer Engineering 37 2017 ), S. 537-546 ISSN: 0334-6447 10.1515/polyeng-2016-0306 Kurth K. , Drummer D. :Variation of the Pole Length in Pole-Oriented Bonded Rings Journal of Polymers 2017 2017 ), S. 11 ISSN: 2356-7570 10.1155/2017/8241859 Lanzl L. , Wudy K. , Greiner S. , Drummer D. :Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen 5. Industriekolloquium des SFB 814 (Nürnberg 12. Dezember 2017 - 12. Dezember 2017 )In: 5. Industriekolloquium des SFB 814 2017 Leisen C. , Wolf M. , Drummer D. :Influence of the Mold Temperature on the Material Properties and the Vibration Welding Process of Cross-Linked Polyamide 66 Polymer Engineering and Science 2017 )ISSN: 0032-3888 10.1002/pen Lexow M. , Drexler M. , Drummer D. :Fundamental investigation of part properties at accelerated beam speeds in the selective laser sintering process Rapid Prototyping Journal 23 2017 ), S. 1099-1106 ISSN: 1355-2546 10.1108/RPJ-04-2016-0060 Löhner MJ. , Drummer D. :Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy Journal of Polymer Engineering 37 2017 ), S. 411-420 ISSN: 0334-6447 10.1515/polyeng-2016-0175 Löhner MJ. , Drummer D. :Influence of Particle Size in Multi-layer Rotational Molding with a Multiphase Interlayer to generate Mechanical Adhesion SPE Antec 2017 (Anaheim 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec 2017 Löhner MJ. , Drummer D. :Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht Zeitschrift Kunststofftechnik 13 2017 ), S. 1-31 ISSN: 1864-2217 10.3139/O999.01012017 Löhner MJ. , Drummer D. :Optimization of adhesion in multi-layer rotational molded parts by including a multi-phase interlayer Zeitschrift Kunststofftechnik 2017 2017 ), S. 1-31 ISSN: 1864-2217 10.3139/O999.01012017 Meister S. , Fischer C. , Drummer D. :Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics Zeitschrift Kunststofftechnik 13 2017 ), S. 212-232 ISSN: 1864-2217 10.3139/O999.01042017 Meister S. , Hertle S. , Drummer D. :Layer-dependent characterization of wear behaviour on variothermal injection moulded micro parts using pin on disc measurements Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 23 2017 ), S. 2807-2814 ISSN: 0946-7076 10.1007/s00542-016-3051-8 Obst P. , Launhardt M. , Drummer D. , Osswald P. , Osswald T. :Failure Criterion for SLS Additive Manufactured Parts SPE Antec (Anaheim 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec 2017 Sarabi B. , Drummer D. :Understanding flame-retardant grades better Kunststoffe International 107 2017 ), S. 84-87 ISSN: 1862-4243 Schiffers R. , Topic N. , Moser S. , Drummer D. :A method for controlling the mold filling volume for BMC injection molding 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA 8. Mai 2017 - 10. Mai 2017 )In: Annual Technical Conference - ANTEC, Conference Proceedings 2017 Wildner W. , Drummer D. :The mechanical and optical properties of injection-moulded PMMA, filled with glass particles of a matching refractive index Polymers and Polymer Composites 25 2017 ), S. 453-462 ISSN: 1478-2391 Wolf M. , Kleffel T. , Leisen C. , Drummer D. :Joining of Incompatible Polymer Combinations by Form Fit Using the Vibration Welding Process International Journal of Polymer Science 2017 2017 ), S. 8 ISSN: 1687-9422 10.1155/2017/6809469 Wudy K. , Hinze M. , Ranft F. , Drummer D. , Schwieger W. :Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents Journal of Materials Processing Technology 246 2017 ), S. 136-143 ISSN: 0924-0136 10.1016/j.jmatprotec.2017.03.011 Wörz A. , Wudy K. , Drummer D. , Wegner A. , Witt G. :Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts Journal of Polymer Engineering 2017 )ISSN: 0334-6447 10.1515/polyeng-2017-0227 Zhai Z. , Gröschel C. , Drummer D. :Investigating the in-plane mechanical behavior of single-ply quasi-unidirectional glass fiber/polypropylene composites Journal of Polymer Engineering 37 2017 ), S. 401-409 ISSN: 0334-6447 10.1515/polyeng-2016-0247 Zhai Z. , Jiang By. , Drummer D. :Characterization of nonlinear response in quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading Polymer Testing 63 2017 ), S. 521-529 ISSN: 0142-9418 10.1016/j.polymertesting.2017.09.019 Zhong Y. , Zhang L. , Fischer A. , Wang L. , Drummer D. :The effect of hBN on the flame retardancy and thermal stability of P-N flame retardant PA6 Journal of Macromolecular Science Part A-Pure and Applied Chemistry 2017 )ISSN: 1060-1325 10.1080/10601325.2017.1387484 2016 Braun T. , Greiner S. , Franke J. , Drummer D. :Additive Plasma Metallization of Spatial Ceramic Injection Molded Components In: 12th International Congress Molded Interconnect Devices 2016 , S. 62--67 Braun T. , Greiner S. , Franke J. , Drummer D. :Additive Plasma Metallization of Spatial Ceramic Injection Molded Components 12th International Congress Molded Interconnect Devices (Würzburg 28. September 2016 - 29. September 2016 )In: 12th International Congress Molded Interconnect Devices (MID): Scientific Proceedings 2016 10.1109/ICMID.2016.7738930 Drummer D. , Gröschel C. , Zhao Y. :Eliminating weld-seam weakness Kunststoffe International 106 2016 ), S. 52-55 ISSN: 1862-4243 Drummer D. , Jiang By. , Weng C. , Zhou My. :Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts Journal of Central South University 23 2016 ), S. 2536-2541 ISSN: 2227-5223 10.1007/s11771-016-3314-7 Drummer D. , Meister S. , Wildner W. :Affecting processing and properties of injection moulded thin-wall parts using dynamic tempered rapid tooling moulds Zeitschrift Kunststofftechnik 2016 2016 ), S. 1-30 ISSN: 1864-2217 Drummer D. , Meister S. , Wildner W. :Prozess- und Eigenschaftsbeeinflussung dünnwandiger Spritzgießteile mittels dynamisch temperierten Rapid Tooling Spritzgießwerkzeugen Zeitschrift Kunststofftechnik 12 2016 ), S. 1-30 ISSN: 1864-2217 Fischer A. , Drummer D. :Polymer films for laser-structured circuit carriers 12th International Congress on Molded Interconnect Devices, MID 2016 10.1109/ICMID.2016.7738919 Fischer A. , Meister S. , Drummer D. :Effect of fillers on the metallization of laserstructured polymer parts Journal of Polymer Engineering 37 2016 )ISSN: 0334-6447 10.1515/polyeng-2016-0055 Fischer C. , Drummer D. :Crystallization and Mechanical Properties of Polypropylene under Processing-Relevant Cooling Conditions with respect to Isothermal Holding Time International Journal of Polymer Science 2016 2016 ), S. 11 ISSN: 1687-9422 10.1155/2016/5450708 Fischer C. , Meister S. , Drummer D. :Einfluss der Bauteildimensionen auf die Strukturausbildung und die Gebrauchseigenschaften beim Mikrospritzgießen von Polyamid 66 Fachtagung Polyamide 2016 (Würzburg 20. April 2016 - 20. April 2016 )Gröschel C. , Drummer D. :Novel process enables more uniform wall thickness in formed composites SPE Plastics Research Online 2016 ), S. 2 10.2417/spepro.005866 Hertle S. , Drexler M. , Drummer D. :Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion Macromolecular Materials and Engineering 301 2016 ), S. 1482-1493 ISSN: 1439-2054 10.1002/mame.201600259 Jungmeier A. , Fischer C. :Untersuchungen zum Mikrothermoformen von Polycarbonat-Folien und zu dessen Integration in den Spritzgießprozess Zeitschrift Kunststofftechnik 12 2016 ), S. 356-381 ISSN: 1864-2217 Kurth K. , Drummer D. :Einflussfaktoren auf die Herstellung kunststoffgebundener multipolarer Magnetringe 5. Ilmenauer Magnettag (Ilmenau 8. Juni 2016 - 8. Juni 2016 )Kurth K. , Drummer D. :Influences on the magnetic properties of injection molded multipolar rings International Polymer Processing 31 2016 ), S. 356-363 ISSN: 0930-777X 10.3139/217.3211 Kurth K. , Drummer D. :Kunststoffgebundene Dauermagnete VDI-Fachkonferenz "Kunststoffe in der Mechatronik & Polytronik" (Düsseldorf 6. Dezember 2016 - 6. Dezember 2016 )Kurth K. , Drummer D. :Kunststoffgebundene Dauermagnete - Stand, Anwendung und Perspektiven 2. Fraunhofer Fachtagung "Magnetwerkstoffe und seltene Erden" (Hanau 30. Juni 2016 - 30. Juni 2016 )Kurth K. , Grünewald E. , Drummer D. :Influences of the variation of process parameters on the pole length of multipolar bonded magnets 74th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Indianapolis 2016 Lanzl L. , Greiner S. , Wudy K. , Drummer D. :Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties iCAT 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Proceedings of 6th International Conference on Additive Technologies 2016 Lanzl L. , Wudy K. , Drexler M. , Drummer D. :Laser-high-speed-DSC: Process-oriented thermal analysis of PA 12 in selective laser sintering Physics Procedia 83 2016 ), S. 981-990 ISSN: 1875-3892 10.1016/j.phpro.2016.08.103 Launhardt M. , Wörz A. , Loderer A. , Laumer T. , Drummer D. , Hausotte T. , Schmidt M. :Detecting surface roughness on SLS parts with various measuring techniques Polymer Testing 53 2016 ), S. 217–226 ISSN: 0142-9418 10.1016/j.polymertesting.2016.05.022 Leisen C. , Drummer D. :Infrared welding of cross-linkable polyamide 66 eXPRESS Polymer Letters 2016 ), S. 849-859 ISSN: 1788-618X 10.3144/expresspolymlett.2016.79 Leisen C. , Seefried A. , Drummer D. :Post-crosslinking behavior of radiation crosslinked polyamide 66 during vibration welding Polymer Engineering and Science 56 2016 ), S. 735-742 ISSN: 0032-3888 10.1002/pen.24300 Li M. , Zhong Y. , Wang Z. , Fischer A. , Ranft F. , Drummer D. , Wu W. :Flame retarding mechanism of Polyamide 6 with phosphorus-nitrogen flame retardant and DOPO derivatives Journal of Applied Polymer Science 133 2016 ), S. 1-10 ISSN: 0021-8995 10.1002/app.42932 Löhner MJ. , Drummer D. :Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding Journal of Polymers 2016 2016 ), S. 11 ISSN: 2356-7570 10.1155/2016/5768453 Löhner MJ. , Drummer D. :Multi-layer rotational molding of pe-pa utilizing a mulitphase interlayer to generate mechanical adhesion 74th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Indianapolis 2016 (Indianapolis In: SPE Proceedings ANTEC 2016 Mattner T. , Drummer D. :Influence of pressure on end corrections in capillary rheometry Rheologica Acta 55 2016 ), S. 823-832 ISSN: 0035-4511 10.1007/s00397-016-0958-z Meister S. , Drummer D. :Micro assembly injection moulding with variothermal mould tempering Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 22 2016 ), S. 1-9 ISSN: 0946-7076 10.1007/s00542-016-2820-8 Ruther F. , Singh R. , Zehnder T. , Cicha I. , Boccaccini AR. , Detsch R. :Development of a biofabrication process for the manufacture of vessel like structures Annual Conference of the German Society for Biomaterials 2016 (Aachen 29. September 2016 - 1. Oktober 2016 )In: BioNanoMaterials (Hrsg.): Band 17 , Berlin/Boston 2016 10.1515/bnm-2016-1001. Schmidt J. , Gomez Bonilla JS. , Sachs M. , Lanzl L. , Wudy K. , Wirth KE. , Drummer D. , Peukert W. :Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering 26th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin 8. August 2016 - 10. August 2016 )Schmidt J. , Sachs M. , Fanselow S. , Zhao M. , Romeis S. , Drummer D. , Wirth KE. , Peukert W. :Optimized polybutylene terephthalate powders for selective laser beam melting Chemical Engineering Science 156 2016 ), S. 1-10 ISSN: 0009-2509 10.1016/j.ces.2016.09.009 Schmidt J. , Sachs M. , Zhao M. , Fanselow S. , Wudy K. , Drexler M. , Drummer D. , Wirth KE. , Peukert W. :A novel process for production of spherical PBT powders and their processing behavior during laser beam melting 31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea 7. Juni 2015 - 11. Juni 2015 )In: 31st International Conference of the POLYMER PROCESSING SOCIETY 2016 10.1063/1.4942343 Seefried A. , Heinle M. , Drummer D. :Mechanical properties of radiation cross linked polyamide 12 after vacuum thermofoming Production Engineering 10 2016 ), S. 119-128 ISSN: 0944-6524 Wildner W. , Drummer D. :A fiber optic temperature sensor based on the combination of epoxy and glass particles with different thermo-optic coefficients Photonic Sensors 6 2016 ), S. 295-302 ISSN: 1674-9251 10.1007/s13320-016-0328-6 Wildner W. , Drummer D. :A Fiber Optic Temperature Sensor Based on the Combination of Two Materials with Different Thermo-Optic Coefficients IEEE Sensors Journal 16 2016 ), S. 688 - 692 ISSN: 1530-437X 10.1109/JSEN.2015.2488979 Wildner W. , Drummer D. :Nano Filler Materials for Transparent Polymer Composites: Influences on the Properties and on the Transparency --- A review Polymer Composites 2016 )ISSN: 0272-8397 Wudy K. , Drexler M. , Lanzl L. , Drummer D. :Analysis of time dependent thermal properties for high rates in selective laser sintering iCAT 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Proceedings of 6th International Conference on Additive Technologies 2016 Wudy K. , Drummer D. :Aging Behavior of Polyamide 12 Interrelation between Bulk Characteristics and Part Properties 27th Solid Freeform Fabrication Symposium (Austin, Tx 8. August 2016 - 10. August 2016 )In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2016 Wudy K. , Lanzl L. , Drummer D. :Selective Laser Sintering of Filled Polymer Systems: Bulk and Laser Beam Interaction Physics Procedia 83 2016 ), S. 991-1002 ISSN: 1875-3892 10.1016/j.phpro.2016.08.104. Wudy K. , Lanzl L. , Drummer D. :Selective laser sintering of filled polymer systems: Bulk properties and laser beam material interaction Physics Procedia 83 2016 ), S. 991-1002 ISSN: 1875-3892 10.1016/j.phpro.2016.08.104 Zhai Z. , Gröschel C. , Drummer D. :Tensile behavior of quasi-unidirectional glass fiber/polypropylene composites at room and elevated temperatures Polymer Testing 54 2016 ), S. 126-133 ISSN: 0142-9418 10.1016/j.polymertesting.2016.07.003 2015 Drexler M. , Drummer D. , Wudy K. :Einfluss des Pulverauftragsprozesses auf den selektiven Strahlschmelzprozess thermoplastischer Kunststoffe RapidTech 2015 (Erfurt 10. Juni 2015 - 11. Juni 2015 )In: Tagungsband / Digital Proceedings RapidTech 2015 2015 Drexler M. , Drummer D. , Wudy K. :Interaction between Time Dependent Exposure Strategies and Part Positioning within Selective Laser Melting Process of Plastics International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), S. 13-19 ISSN: 2197-8581 10.3991/ijes.v3i1.4286 Drexler M. , Lexow M. , Drummer D. :Selective Laser Melting of Polymer Powder - Part Mechanics as Function of Exposure Speed Physics Procedia 78 2015 ), S. 328-336 ISSN: 1875-3892 10.1016/j.phpro.2015.11.047 Drummer D. , Drexler M. , Wudy K. :Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing 7th World Congress on Particle Technology (WCPT7) (Beijing In: New Paradigm of Particle Science and Technology Proceedings of The 7th World Congress on Particle Technology 2015 Drummer D. , Drexler M. , Wudy K. :Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing Procedia Engineering 102 2015 ), S. 1908-1917 ISSN: 1877-7058 10.1016/j.proeng.2015.01.331 Drummer D. , Drexler M. , Wudy K. :Derivation of heating rate dependent exposure strategies for the selective laser melting of thermoplastic polymers PPS-30 (Cleveland In: AIP Conference Proceedings 2015 10.1063/1.4918513 Drummer D. , Harder R. , Witt G. , Wegner A. , Wudy K. , Drexler M. :Long-term Properties of Laser Sintered Parts of Polyamide 12 - Influence of Storage Time and Temperature on the Aging Behavior International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), S. 20-27 ISSN: 2197-8581 10.3991/ijes.v3i1.4289 Drummer D. , Heinle M. , Meister S. :Influence of short fibre reinforcement on properties of injection moulded micro parts in dependence of fibre content and part dimensions Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 21 2015 ), S. 1-9 ISSN: 0946-7076 10.1007/s00542-015-2752-8 Drummer D. , Medina Hernandez M. , Drexler M. , Wudy K. :Polymer powder production for laser melting through immiscible blends Procedia Engineering 102 2015 ), S. 1918-1925 ISSN: 1877-7058 10.1016/j.proeng.2015.01.332 Drummer D. , Vittinghoff J. , Kleffel T. , Kuhmann K. , Farges O. , Gruhn M. , Risthaus M. , Baranowski T. , Koch R. , Nießen B. , Wehmeyer I. , Küsters K. , Lutter F. , Malek T. , Theiler S. , Braun S. , Jobi A. , Szabo SA. , Schwarzer R. , Mang S. , Welsch K. , Brandt P. , van Haag J. , Hopmann C. , Schild J. :Handbuch Kunststoff-Metall-Hybridtechnik Erlangen Lehrstuhl für Kunststofftechnik 2015 ISBN: 978-3-931864-66-8 Drummer D. , Wudy K. , Drexler M. :Modelling of the Aging Behavior of Polyamide 12 Powder during Laser Melting Process 30th Annual Meeting of the Polymer Processing Society (Cleveland, USA In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2015 10.1063/1.4918514 Drummer D. , Wudy K. , Drexler M. :Selektives Strahlschmelzen von Polymer-Blends: Prozess- und Werkstoffanforderungen RapidTech 2015 (Erfurt In: Tagungsband / Digital Proceedings RapidTech 2015 2015 Fischer C. , Drummer D. :Beeinflussung von tribologischen Eigenschaften durch dynamische Temperierung Zeitschrift Kunststofftechnik 11 2015 ), S. 1-26 ISSN: 1864-2217 Fischer C. , Drummer D. :Influencing the tribological properties by dynamic tempering Zeitschrift Kunststofftechnik 2015 2015 ), S. 44-68 ISSN: 1864-2217 Frey P. , Heinle M. , Drummer D. , Merklein M. :Influence of metal inserts with microformed edges on subsequent injection assembly moulding for media tight electronic systems 4th International Conference on New Forming Technology, ICNFT 2015 10.1051/matecconf/20152109013 Frey P. , Heinle M. , Leisen C. , Drummer D. , Merklein M. :Embossing of Metal Inserts for Subsequent Assembly Injection Moulding of Media Tight Key Engineering Materials 639 2015 ), S. 99-106 ISSN: 1013-9826 Frey P. , Heinle M. , Leisen C. , Drummer D. , Merklein M. :Embossing of metal inserts for subsequent assembly injection moulding of media tight electronic systems Key Engineering Materials 639 2015 ), S. 99-106 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.639.99 Fuchs K. , Berger F. , Fischer A. , Drummer D. :Influencing factors on field inversion in HVDC cables Jicable'15 - 9th International Conference on Insulated Power Cables (Paris 21. Juni 2015 - 25. Juni 2015 )In: Achter Workshop Optische Technologien - LED Beleuchtung - Technik und Anwendung , Garbsen 2015 Galovskyi B. , Hausotte T. , Drummer D. , Harder R. :In-line layer wise measurements for selective laser sintering process XXI IMEKO World Congress “Measurement in Research and Industry” (Prague, Czech Republic 30. August 2015 - 4. September 2015 )Gath C. , Drummer D. :Studie zur Umsetzbarkeit der Laserdirektstrukturierung von lasergesinterten Bauteilen RapidTech 2015 (Erfurt 10. Juni 2015 - 11. Juni 2015 )In: Tagungsband / Digital Proceedings RapidTech 2015 2015 Gierl B. , Drummer D. :Possibilities and potential of plastic gear applications International VDI Conference on High Performance Plastic Gears (München 5. Oktober 2015 - 5. Oktober 2015 )Gröschel C. , Drummer D. :Wall thickness distribution of continuous glass fiber reinforced polyamide 6 composite parts formed by gas pressure ANTEC 2015 (Cleveland, USA In: SPE Proceedings ANTEC 2015 Heinle M. , Drummer D. :Heat transfer coefficient in injection molding of polymers International Polymer Processing 30 2015 ), S. 434-441 ISSN: 0930-777X 10.3139/217.3084 Heinle M. , Drummer D. :Measuring mechanical stresses on inserts during injection molding Advances in Mechanical Engineering 7 2015 ), S. 1-6 ISSN: 1687-8132 10.1177/1687814015584479 Heinle M. , Drummer D. :Temperature-dependent coefficient of thermal expansion (CTE) of injection molded, short-glass-fiber-reinforced polymers Polymer Engineering and Science 55 2015 ), S. 2661-2668 ISSN: 1548-2634 10.1002/pen.24159 Jungmeier A. :The effect of temperature and pressure on microthermoforming thermoplastic films integrated in the injection moulding process Journal of Polymer Engineering 2015 ), S. 1-9 ISSN: 0334-6447 10.1515/polyeng-2015-0232 Jungmeier A. , Drummer D. :Microthermoforming Integrated in the Injection Molding Process for Fabrication of Film-Based Microstructured Parts International Polymer Processing 30 2015 ), S. 381-389 ISSN: 0930-777X Jungmeier A. , Drummer D. :Mikrothermoformen thermoplastischer Folien im Spritzgießprozess 7. Kolloquium Mikroproduktion (Aachen 16. November 2015 - 17. November 2015 )In: 7. Kolloquium Mikroproduktion , Aachen 2015 Laumer T. , Wudy K. , Drexler M. , Amend P. , Drummer D. , Schmidt M. , Roth S. :Fundamental investigation of laser beam melting of polymers for additive manufacture (vol 26, 042003, 2014) Journal of Laser Applications 27 2015 )ISSN: 1042-346X 10.2351/1.4897013 Launhardt M. , Drexler M. , Drummer D. :Rapid-Manufacturing-Process for Elastomeric Components International Journal of Recent Contributions from Engineering, Science & IT 3 2015 )ISSN: 2197-8581 10.3991/ijes.v3i2.4593 Launhardt M. , Fischer C. , Drummer D. :Research on the Influence of Geometry and Positioning on Laser Sintered Parts Applied Mechanics and Materials 805 2015 ), S. 105-114 ISSN: 1660-9336 10.4028/www.scientific.net/AMM.805.105 Leisen C. , Drummer D. :Vibrationsschweissen von strahlenvernetzten Polyamid 66 mit PA6T/6I GF 50 Joining Plastics - Fügen von Kunststoffen 9 2015 ), S. 178-185 ISSN: 1864-3450 Leisen C. , Menacher M. , Drummer D. :Influence of Radiation Cross-Linking of Polyamide 66 on the Characteristics of the Vibration Welding Process Polymer Engineering and Science 55 2015 ), S. 1-7 ISSN: 0032-3888 10.1002/pen.24139 Löhner MJ. , Drummer D. :Influence of Processing Parameters in Reaction Injection Foam Molding on for Multi-Layer Parts on Foam Structure and Mechanical Properties Applied Mechanics and Materials 805 2015 ), S. 131-138 ISSN: 1660-9336 Löhner MJ. , Drummer D. :The effect of pressure variations on the formation of gas inclusions in the rotational molding process Journal of Polymer Engineering 35 2015 ), S. 481-491 ISSN: 0334-6447 10.1515/polyeng-2014-0145 Löhner MJ. , Messingschlager S. , Drummer D. :Computertomographie in der Kunststofftechnik TECHNOMER 2015 (Chemnitz In: Fachbeiträge Technomer 2015 2015 Meister S. , Seefried A. , Drummer D. :Replication quality of micro structures in injection moulded thin wall parts using rapid tooling moulds Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 2015 ), S. 1-12 ISSN: 0946-7076 10.1007/s00542-015-2415-9 Menacher M. , Leisen C. , Drummer D. :Influence of Radiation Cross-Linking on Fiber Orientation in Vibration Welds of Polyamide 66 Polymer Composites 2015 ), S. 1-7 ISSN: 0272-8397 10.1002/pc.23607 Wegner A. , Harder R. , Witt G. , Drummer D. :Determination of Optimal Processing Conditions for the Production of Polyamide 11 Parts using the Laser Sintering Process International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), S. 5-12 ISSN: 2197-8581 10.3991/ijes.v3i1.4249 Wildner W. , Drummer D. :Modelling haze and transmission of transparent filled systems in dependence of filler surface area, refractive index difference and wavelength ANTEC 2015 (Orlando, USA In: SPE Proceedings ANTEC 2015 Wudy K. , Drummer D. :Aging behavior of polyamide 12 during selective laser melting process - influence on mechanical properties ANTEC 2015 (Orlando, USA 23. März 2015 - 25. März 2015 )In: Society of Plastics Engineers (Hrsg.): SPE Proceedings ANTEC 2015 Zhao M. , Drummer D. , Wudy K. , Drexler M. :Sintering Study of Polyamide 12 Particles for Selective Laser Melting International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), S. 28-33 ISSN: 2197-8581 10.3991/ijes.v3i1.4290 Zhao M. , Drummer D. , Wudy K. , Drexler M. :Untersuchung des Schmelz- und Sinterprozesses von Polyamid 12 beim selektiven Strahlschmelzen RapidTech 2015 (Erfurt In: Tagungsband / Digital Proceedings RapidTech 2015 2015 2014 Drexler M. , Wudy K. , Drummer D. :Selektives Strahlschmelzen von Kunststoffen - Ganzheitliche Prozessbetrachtung zur gezielten Optimierung von Bauteileigenschaften 3. Industriekolloquium des SFB 814 (Nürnberg In: 3. Industriekolloquium des SFB 814 , Erlangen 2014 Drummer D. , Drexler M. , Wudy K. :Derivation of Heating Rate Dependent Exposure Strategies for the Selective Laser Melting of Thermoplastic Polymers 30th Annual Meeting of the Polymer Processing Society (Cleveland, USA In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2014 Drummer D. , Drexler M. , Wudy K. :Impact of Heating Rate During Exposure of Laser Molten Parts on the Processing Window of PA12 Powder Physics Procedia 56 2014 ), S. 184-192 ISSN: 1875-3892 10.1016/j.phpro.2014.08.162 Drummer D. , Drexler M. , Wudy K. :Influence of Energy Input on Degradation Behavior of Plastic Components Manufactured by Selective Laser Melting 5th International Conference on Additive Technologies - iCAT2014 (Vienna 8. September 2014 - 11. September 2014 )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 10.1016/j.phpro.2014.08.160 Drummer D. , Drexler M. , Wudy K. :Resulting melt-pool-shape during selective beam melting of thermoplastics as function of energy input parameters Fraunhofer Direct Digital Conference 2014 (Berlin In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference , Aachen 2014 Drummer D. , Gröschel C. , Hoffmann L. , Linn C. :Hochleistungsfaserverbundbauteile - Innovativer Verfahrensbaukasten emobility tec 2014 ), S. 8 ISSN: 2193-892X Drummer D. , Harder R. , Witt G. , Wegner A. , Wudy K. , Drexler M. :Long-term properties of laser sintered parts of polyamide 12 - Influence of storage time and temperature on the ageing behaviour 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Drummer D. , Jungmeier A. , Leisen C. , Peters G. :Neuartiges Werkzeug- und Temperierkonzept für tribologisch optimierte Mikroteile Konstruktion 1/2 2014 ), S. 61-66 ISSN: 0720-5953 Drummer D. , Leisen C. , Jungmeier A. , Peters G. :Novel mold and tempering concept for tribological optimized micropartsnovel mold and tempering concept for tribological optimized microparts Neuartiges Werkzeug- und Temperierkonzept fur tribologisch optimierte Mikroteile Konstruktion 1/2-2014 2014 ), S. 61-66 ISSN: 0720-5953 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902134422&origin=inward Drummer D. , Meister S. :Correlation of Processing, Inner Structure, and Part Properties of Injection Moulded Thin-Wall Parts on Example of Polyamide 66 International Journal of Polymer Science 2014 2014 ), Art.Nr.: 718926 ISSN: 1687-9422 10.1155/2014/718926 Drummer D. , Meister S. , Hofmann S. :Leichtfließend und orientierungsarm Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 6 2014 ), S. 42-45 ISSN: 0032-1338 Drummer D. , Seefried A. , Meister S. :Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods Advances in Materials Science and Engineering 2014 ), S. 8 ISSN: 1687-8434 10.1155/2014/769206 Drummer D. , Wudy K. , Drexler M. :Influence of Energy Input on Degradation Behavior of Polyamide 12 during selective Laser Melting Process Fraunhofer Direct Digital Conference 2014 (Berlin In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference , Aachen 2014 Drummer D. , Wudy K. , Drexler M. :Selective laser melting of polyamide 12: A holistic approach for the modeling of the aging behavior 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Fischer A. , Müller H. , Kuhn T. , Drummer D. , Kück H. , Franke J. :Reliability of LDS Conductor Paths - Influencing Factors and Characterization Methods Molded Interconnected Devices (Fürth 24. September 2014 )In: Franke J, Kuhn T, Birkicht A, Pojtinger A (Hrsg.): 11th International Congress Molded Interconnect Devices , Nürnberg 2014 Fischer A. , Ranft F. , Drummer D. :Auslegungsstrategie für Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe VDI - Kunststoffe in Optischen Systemen (Baden-Baden 1. Oktober 2014 )Fischer C. , Drummer D. :The Influence of Inner Component and Topographical Properties on Tribological Parameters of Injection-Moulded Microparts Advances in Mechanical Engineering 10 2014 ), S. 10 ISSN: 1687-8132 10.1155/2014/321674 Fischer C. , Leisen C. , Merken D. , Jungmeier A. , Drummer D. :The influence of proccessing temperature on morphological and tribological properties of injection-moulded micro parts Advances in Mechanical Engineering 2014 )ISSN: 1687-8132 10.1155/2014/218761 Galovskyi B. , Hausotte T. , Drummer D. , Zhao M. :Model of a Measurement Artifact for Additive Manufacturing 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Gröschel C. , Drummer D. :The Influence of Moisture and Laminate Setup on the De-Consolidation Behavior of PA6/GF Thermoplastic Matrix Composites International Polymer Processing 5 2014 ), S. 660-668 ISSN: 0930-777X Gröschel C. , Drummer D. :Twin-O-Sheet: producing functionalized hollow bodies in a shorter process chain JEC Composites Magazine 05 2014 ), S. 51-53 ISSN: 1639-965X Kurth K. , Drummer D. :Influences of the design and production on the characteristic properties of multipolar bonded magnets 2014 4th International Electric Drives Production Conference, EDPC 2014 10.1109/EDPC.2014.6984391 Laumer T. , Wudy K. , Drexler M. , Amend P. , Drummer D. , Schmidt M. , Roth S. :Fundamental investigation of laser beam melting of polymers for additive manufacture Journal of Laser Applications 26 2014 )ISSN: 1042-346X 10.2351/1.4892848 Linn C. , Hoffmann L. , Gröschel C. , Drummer D. :Großvolumige Organoblech-Hohlkörperstrukturen in einem Schuss Lightweight Design 7 2014 ), S. 44-49 ISSN: 1865-4819 Meister S. , Drummer D. :Dimension-dependent long-term properties of injection molded micro parts ANTEC 2014 (Las Vegas, USA In: SPE ANTEC 2014 2014 Merken D. , Drummer D. :Friction and wear of thermoplastic polymers with respect to spur-gear applications 1st International Conference on Polymer Tribology (Bled, Slovenia In: PolyTrib 2014 2014 Messingschlager S. , Drummer D. :Material Characterization of Strontium Ferrite Powders for Producing Sintered Magnets by Ceramic Injection Molding Advances in Materials Science and Engineering 2014 2014 ), S. 8 ISSN: 1687-8434 Messingschlager S. , Drummer D. :One-Shot Production of Sintered Magnets Kunststoffe International 3 2014 ), S. 62-65 ISSN: 1862-4243 Messingschlager S. , Drummer D. :Sintermagnete aus einem Guss Kunststoffe 3 2014 ), S. 100-103 ISSN: 0023-5563 Messingschlager S. , Drummer D. :Wenn Pulver ein Lächeln zaubert Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 2014 ), S. 78-80 ISSN: 0032-1338 Plettke R. , Schaub A. , Gröschel C. , Scheitler CJ. , Heinle M. , Ranft F. , Merklein M. , Schmidt M. , Drummer D. :A new process chain for joining sheet metal to fibre composite sheets Material Forming ESAFORM 2014 (Finnland 7. Mai 2014 - 9. Mai 2014 )In: Key Engineering Materials (Volumes 611 - 612) 2014 10.4028/www.scientific.net/KEM.611-612.1468 Plettke R. , Schaub A. , Gröschel C. , Scheitler CJ. , Vetter M. , Hentschel O. , Ranft F. , Merklein M. , Schmidt M. , Drummer D. :A new process chain for joining sheet metal to fibre composite sheets Key Engineering Materials 611-612 2014 ), S. 1468-1475 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.611-612.1468 Ranft F. , Menacher M. , Drummer D. :Vibrationsschweißen wärmeleitender Thermoplaste Joining Plastics - Fügen von Kunststoffen 8 2014 ), S. 119-127 ISSN: 1864-3450 Riedlbauer DR. , Drexler M. , Drummer D. , Steinmann P. , Mergheim J. :Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12 Computational Materials Science 93 2014 ), S. 239-248 ISSN: 0927-0256 10.1016/j.commatsci.2014.06.046 Seefried A. , Drummer D. :Thermoforming radiation crosslinked polyamide - effects of degree of cross linking and thermoforming processing conditions ANTEC 2014 (Las Vegas, USA In: SPE ANTEC 2014 2014 Vittinghoff J. , Drummer D. :Investigating the full-faced joining of polymer-metal hybrid structures ANTEC 2014 (Las Vegas, USA In: SPE ANTEC 2014 2014 Wegner A. , Harder R. , Witt G. , Drummer D. :Influence of Process Parameters on the Part Properties of Laser Sintered Polyamide 11 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Wildner W. , Drummer D. :Wavelength Dependent Haze of Transparent Glass-Particle Filled Poly(Methyl Methacrylate) Composites ISRN Optics 2014 ), Art.Nr.: 802369 ISSN: 2090-7826 10.1155/2014/802369 Wudy K. , Drummer D. , Drexler M. :Influence of degradation behavior of polyamid 12 powders in laser sintering process on produced parts 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2014 10.1063/1.4873873 Zhao M. , Drummer D. , Wudy K. , Drexler M. :Sintering Study of Polyamide 12 Particles for Selective Laser Melting 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 2013 Drexler M. , Drummer D. , Wudy K. :Effects of the powder bulk density on the porosity of laser molten thermoplastic parts 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 Drexler M. , Drummer D. , Wudy K. , Riedlbauer DR. , Steinmann P. , Mergheim J. :Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften 2. Industriekolloquium des SFB 814 (Nürnberg In: 2. Industriekolloquium des SFB 814 2013 Drummer D. , Drexler M. , Wudy K. :Einfluss der Scangeschwindigkeit auf die Bauteileigenschaften pulver- und strahlbasierter Verfahren RTejournal - Forum für Rapid Technologie 7 2013 ), S. - ISSN: 1614-0923 Drummer D. , Fuchs M. :Kunststoffe in der Elektronikproduktion Laser in der Elektronikproduktion & Feinwerktechnik (LEF) (Fürth In: LEF 2013 2013 Drummer D. , Gröschel C. , Seefried A. :Direkte Umformung von Organoblechen durch Gasdruck Kunststoffe 2013 ), S. 70-74 ISSN: 0023-5563 Drummer D. , Messingschlager S. :Auswirkungen differierender Füllgrade auf die Urform- und Sintereigentschaften im Keramikspritzguss Keramische Zeitschrift 2013 ), S. 36-40 ISSN: 0023-0561 Drummer D. , Messingschlager S. :Influence of different filling degrees on the original shape and sintering behavior in ceramic injection moulding Keramische Zeitschrift 65 2013 ), S. 36-40 ISSN: 0023-0561 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84880224707&origin=inward Gröschel C. , Drummer D. :Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck (Fürth In: Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck 2013 Gröschel C. , Drummer D. , Seefried A. :Direct Forming of Organosheets by Gas Pressure Kunststoffe International 12 2013 ), S. 54-57 ISSN: 1862-4243 Heinle M. , Drummer D. :Calculation of the anisotropic, temperature-dependent thermal expansion coefficient (TEC) of parts made from short-fiber-reinforced polymers 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH In: SPE Proceedings ANTEC 2013 2013 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903525119&origin=inward Heinle M. , Drummer D. :Konstruktiv arbeiten mit der anisotropen thermischen Dehnung von verstärkten Kunststoffen Konstruktion 2013 ), S. 83-87 ISSN: 0720-5953 Heinle M. , Drummer D. , Ehrenstein G. :Dichtheit von Steckverbindern unter Temperaturbelastung 4th International Connectors Symposium (Lemgo In: Symposium Connectors GMM Fachtagung 2013 Kurth K. , Drummer D. :Improvement of the magnetic properties of injection molded polymer bonded magnets 2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg 29. Oktober 2013 - 30. Oktober 2013 )10.1109/EDPC.2013.6689718 Meister S. , Drummer D. :Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering Advances in Mechanical Engineering 2013 ), Art.Nr.: 407964 ISSN: 1687-8132 10.1155/2013/407964 Meister S. , Drummer D. :Alterung bei Mikrospritzgießteilen - Einfluss variothermer Werkzeugtemperierung GIT Labor-Fachzeitschrift 2013 ), S. 300-302 ISSN: 0016-3538 Meister S. , Drummer D. :Influence of manufacturing conditions on measurement of mechanical material properties on thermoplastic micro tensile bars Polymer Testing 32 2013 ), S. 432-437 ISSN: 0142-9418 10.1016/j.polymertesting.2012.12.006 Meister S. , Drummer D. :Influence of mold Temperature on mold Filling Behavior and Part Properties in Micro Injection molding International Polymer Processing 28 2013 ), S. 550-557 ISSN: 0930-777X 10.3139/217.2804 Meister S. , Drummer D. :Investigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering Thescientificworldjournal 2013 )ISSN: 1537-744X 10.1155/2013/845916 Meister S. , Jungmeier A. , Drummer D. :Long-Term Properties of Injection-Molded Micro-Parts: Influence of Part Dimensions and Cooling Conditions on Aging Behavior Macromolecular Materials and Engineering 297 2013 ), S. 994-1004 ISSN: 1438-7492 Meister S. , Vetter K. , Drummer D. :Mechanische Kennwertermittlung für Mikrobauteile an spritzgegossenen Mikro-Zugprüfkörpern Zeitschrift Kunststofftechnik 9 2013 ), S. 74-99 ISSN: 1864-2217 Meister S. , Vetter K. , Drummer D. , Ehrenstein G. :Measurement of mechanical material properties for micro parts on injection moulded micro tensile bars Zeitschrift Kunststofftechnik 9 2013 ), S. 74-99 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84873619715&origin=inward Menacher M. , Drummer D. :Mischmaterialverbindungen: Kleben mit Vibrationstechnik Lightweight Design 6 2013 ), S. 56-61 ISSN: 1865-4819 Menacher M. , Leisen C. , Drummer D. :Formschlüssiges Fügen von Metallen mit Faserverbundkunststoffen mittels Vibrationsschweißtechnik Große Schweißtechnische Tagung (Essen In: DVS Berichte Band 296 zur Großen Schweißtechnischen Tagung 2013 Merken D. , Drummer D. :Temperatur and Sliding Distance Dependency of Assembly molded Friction Clutches 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH In: SPE Proceedings ANTEC 2013 2013 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903541123&origin=inward Messingschlager S. , Drummer D. :Ceramic injection molding - Material analysis, modeling and injection molding simulation 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 Messingschlager S. , Heinle M. , Drummer D. :Aufbereitung im Keramikspritzguss 23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz In: Technomer 2013 2013 Ranft F. , Drummer D. :Angepasste Füllstoffsysteme für das Spritzgießen von Kunststoffbauteilen mit erhöhter Wärmeleitfähigkeit 23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz In: Technomer 2013 2013 Ranft F. , Fischer A. , Drummer D. :Entwicklung neuartiger Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe SMT 2013 - MID Forum (Nürnberg 16. April 2014 - 16. April 2014 )Seefried A. , Drummer D. :Multiaxial elongational behaviour of radiation cross linked polyamide melts Zeitschrift Kunststofftechnik 2013 ), S. 295-319 ISSN: 1864-2217 Seefried A. , Drummer D. :Multiaxiales Dehnverhalten strahlenvernetzter Polyamidschmelzen Zeitschrift Kunststofftechnik 9 2013 ), S. 296-319 ISSN: 1864-2217 Vittinghoff J. , Drummer D. :Analyse des stoffschlüssigen Verbunds an Kunststoff-Metall-Hybridbauteilen 13. Fachtagung - FTK - Fertigungstechnologie Kleben (Stuttgart In: Fertigungstechnologie Kleben 2013 Wudy K. , Drexler M. , Drummer D. :Strategien zur Realisierung konstanter Pulver- und Bauteileigenschaften beim selektiven Laserstrahlschmelzen von Kunststoffen 2. Industriekolloquium des SFB 814 (Nürnberg In: 2. Industriekolloquium des SFB 814 2013 Wudy K. , Drummer D. , Drexler M. :Characterization of polymer materials and powders for selective laser melting 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 Wudy K. , Drummer D. , Drexler M. :Langzeitverhalten von Polyamid 12 Pulver zur Verarbeitung mittels selektivem Laserstrahlschmelzen Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz In: Technomer 2013 2013 Wudy K. , Kühnlein F. , Drummer D. , Drexler M. :Materialalterung beim Rapid Manufacturing - Alterungsverhalten von Kunststoffpulvern beim selektiven Strahlschmelzen GIT Labor-Fachzeitschrift 2013 ), S. 372-375 ISSN: 0016-3538 2012 Drexler M. , Kühnlein F. , Drummer D. :Effects on the density distribution of SLS-parts Laser Assisted Net Shape Engineering 7 (Fürth In: Physics Procedia 39 2012 10.1016/j.phpro.2012.10.066 Drexler M. , Kühnlein F. , Drummer D. :Influence of powder coating on part density as a function of coating parameters 4th International Conference on Additive Technologies (Maribor In: 4th International Conference on Additive Technologies 2012 Drexler M. , Kühnlein F. , Drummer D. :Modeling of Transient Thermal Conditions During Selective Laser Melting 1st International Conference on Thermo-Mechanically Graded Materials (Kassel In: 1st International Conference on Thermo-Mechanically Graded Materials 2012 Drummer D. :Influence of the filler premagnetization in hot runner on its orientability during injection molding of multi polar SmCo-magnets 22nd International Conference and Exhibit: Vital Technologies for Business Success in Changing Global Market, MOLDING 2012 (Miami, FL https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902380484∨igin=inward Drummer D. :Plastic-metal hybrid technology: Materially coherently bonded in injection molding Adhaesion Kleben und Dichten 2012 ), S. 42-46 ISSN: 0943-1454 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84865747942∨igin=inward Drummer D. , Bach FW. , Hopmann C. , Möhwald K. , Piotter V. , Fischer T. , Meister S. , Prehm J. , Prokop J. , Vetter K. , Ehrenstein G. :Neue Prozesstechnologien für die Mikrofertigung Mikroproduktion 10 2012 ), S. 50-57 ISSN: 1614-4538 Drummer D. , Cifuentes SC. , Rietzel D. :Suitability of PLA/TCP for Fused Deposition Modeling Rapid Prototyping Journal 18 2012 ), S. - ISSN: 1355-2546 10.1108/13552541211272045 Drummer D. , Hopmann C. , Vetter K. , Meister S. , Fischer T. , Piotter V. , Prokop J. , Ehrenstein G. :Analysis and Comparative Assessment of Different Process Technologies for Manufacturing Polymer Micro-Elements Materials Science and Engineering B-Advanced Functional Solid-State Materials 2 2012 ), S. 347-362 ISSN: 0921-5107 Drummer D. , Hopmann C. , Vetter K. , Meister S. , Fischer T. , Piotter V. , Prokop J. , Ehrenstein G. :Innovative process technologies for manufacturing thermoplastic micro parts - Analysis and comparative assessment Zeitschrift Kunststofftechnik 8 2012 ), S. 439-467 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84870001732&origin=inward Drummer D. , Hopmann C. , Vetter K. , Meister S. , Fischer T. , Piotter V. , Prokop J. , Ehrenstein G. :Innovative Prozesstechnologien für die Herstellung thermoplastischer Mikrobauteile - Analyse und vergleichende Bewertung Zeitschrift Kunststofftechnik 8 2012 ), S. 439-467 ISSN: 1864-2217 Drummer D. , Kobes M. , Merken D. :A contribution for qualitatively modeling of friction and wear behavior of thermoplastics ANTEC 2012 (Orlando 2. April 2012 - 4. April 2012 )In: SPE Proceedings ANTEC 2012 2012 Drummer D. , Kühnlein F. , Drexler M. :Degradation behaviour of PA 12 powders in laser sintering iCAT 2012 - 4th International Conference on Additive Technologies (Maribor In: Proceedings of the 4th International Conference on Additive Technologies (ICAT 2012) 2012 Drummer D. , Kühnlein F. , Meister S. , Drexler M. :Investigations on the degradation behaviour of PA 12 plastic powders - Influence of high temperatures on the moleculare weight 13th Annual International RAPDASA 2012 Conference (South Africa In: Proceedings of the 13th RAPDASA annual international Conference 2012 Drummer D. , Meister S. , Ehrenstein G. :Einfluss des Werkzeugwerkstoffs auf die Struktur und die Eigenschaften von Mikrobauteilen 3. Industriekolloquium der Forschergruppe 702 (Aachen In: 3. Industriekolloquium der Forschergruppe 702 2012 Drummer D. , Messingschlager S. :Einsatz der Computertomographie zur Material- und Prozesscharakterisierung im Keramikspritzguss 46. Meallographie-Tagung (Rostok In: 46. Meallographie-Tagung 2012 Drummer D. , Ranft F. , Wildner W. :Kunststoffe in Optischen Systemen Kunststoffe 102 2012 ), S. 20-24 ISSN: 0023-5563 Drummer D. , Ranft F. , Wildner W. :Plastics in Optical Systems Kunststoffe International 2012 ), S. 6-10 ISSN: 1862-4243 Drummer D. , Ranft F. , Wildner W. :Trend report: Plastics in optical systems Kunststoffe International 102 2012 ), S. 6-10 ISSN: 1862-4243 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84868565566&origin=inward Drummer D. , Schmidt A. , Seefried A. , Kühnert I. , Ehrenstein G. :Einfluss der Prozessführung auf die Bauteileigenschaften bei der Druckverfestigung amorpher Thermoplaste Zeitschrift Kunststofftechnik 8 2012 ), S. 138-178 ISSN: 1864-2217 Drummer D. , Vetter K. , Ehrenstein G. :Spritzgießen von Mikrobauteilen durch Schmelzevorkompression 3. Industriekolloquium der Forschergruppe 702 (Achen In: 3. Industriekolloquium der Forschergruppe 702 2012 Fuchs M. , Ranft F. , Drummer D. :Thermal Conductive-Modified Polyamide Compounds for Manufacturing MID and Film Substrates 10. International Congress MID (Fürth In: 10. International Congress MID 2012 Goth C. , Heinle M. , Franke J. , Drummer D. :Mediendichte Umhausung spritzgegossener, räumlicher elektronischer Schaltungsträger im Montagespritzguss PLUS - Produktion von Leiterplatten und Systemen 2012 ), S. 376-385 Hartmann W. , Hausotte T. , Drummer D. , Wudy K. :Anforderungen und Randbedingungen für den Einsatz optischer Messsysteme zur In-Line-Prüfung additiv gefertigter Bauteile Rapid.Tech 2012 (Erfurt In: RTejournal - Forum für Rapid Technologie 2012 http://www.rtejournal.de/ausgabe9/3327/ Hartmann W. , Hausotte T. , Kühnlein F. , Drummer D. :Incremental In-line Measurement Technique for Additive Manufacturing Direct Digital Manufacturing Conference (DDMC) (Berlin In: Proceedings 2012 Heinle M. , Drummer D. :Hybridtechnik in mechatronischen Systemen Hybridica Forum (Müchen In: Hybridica Foum 2012 Heinle M. , Drummer D. :Stress im Prozess - Belastung elektronischer Bauelemente im Montage-Spritzgießprozess Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 63 2012 ), S. 62-66 ISSN: 0032-1338 Heinle M. , Goth C. , Drummer D. , Franke J. :Assembly Molding for Resistant Media Tight Molded Interconnect Devices 15th Int. Conference Polymeric Materials (Halle In: 15th Int. Conference Polymeric Materials 2012 Hoffmann L. , Müller T. , Drummer D. :Hochbelastbare Leichtbauteile aus der Spritzgießmaschine - Werkstoffe, Verfahren und Perspektiven Mitteldeutscher Kunststofftag 2012 (Leipzig In: Mitteldeutscher Kunststofftag 2012 2012 Jungmeier A. , Wildner W. , Drummer D. , Kühnert I. :Compression-Induced Solidification: A Novel Processing Technique for Precise Thermoplastic Optical Components with Negligible Internal Stresses ISRN Optics 2012 2012 ), Art.Nr.: 872816 ISSN: 2090-7826 10.5402/2012/872816 Kühnlein F. , Rietzel D. , Drummer D. :Investigations of the directional mechanical properties and reasons of fracture of Mask Sintered PA12-components Zeitschrift Kunststofftechnik 8 2012 ), S. 106-137 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84857846193&origin=inward Kühnlein F. , Rietzel D. , Drummer D. :Untersuchung der richtungsabhängigen mechanischen Eigenschaften und Bruchursachen maskengesinterter PA12-Bauteile Zeitschrift Kunststofftechnik 8 2012 ), S. 106-137 ISSN: 1864-2217 Linn C. , Hoffmann L. , Müller T. , Drummer D. :Herstellung von CFK-Bauteilen durch Direktimprägnierung mit Thermoplasten in der Spritzgießmaschine Lightweight Design 2012 ), S. 56-61 ISSN: 1865-4819 Meister S. , Drummer D. :Eigenschaftsoptimierung von Mikrobauteilen - Spritzgießen mit variothermer Werkzeugtemperierung Konstruktion 11 2012 ), S. 11-13 ISSN: 0720-5953 Meister S. , Drummer D. :Orientierungsarm dank langsamer Abkühlung Mikroproduktion 2012 ), S. 54-58 ISSN: 1614-4538 Menacher M. , Drummer D. :Cross-linking in adhesives using vibration technology Adhesion Adhesives & Sealants 1 2012 ), S. 42-46 ISSN: 2192-2624 Menacher M. , Drummer D. :Kleben mittels Vibrationstechnologie - schnell, selbstreinigend und qualitätssicher Joining Plastics - Fügen von Kunststoffen 6 2012 ), S. 38-43 ISSN: 1864-3450 Merken D. , Drummer D. :Assembly injection molded friction clutches as mechanical overload protection for mechatronic devices 2012 2nd International Electric Drives Production Conference, EDPC 2012 (Nürnberg In: Electric Drives Production Conference 2012 10.1109/EDPC.2012.6425127 Merken D. , Kobes M. , Drummer D. :Mehr-Komponenten-Technologie steigert Leistungsfähigkeit von Kunststoffzahnrädern Konstruktion 2012 ), S. 77-82 ISSN: 0720-5953 Merken D. , Kobes M. , Drummer D. :Multi component technology enhances capability of plastic gears Konstruktion 2012 ), S. 77-82 ISSN: 0720-5953 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84897882446&origin=inward Müller T. , Drummer D. :Ein energieeffizientes Verfahren für den Leichtbau Kunststoffe 2012 ), S. - ISSN: 0023-5563 Müller T. , Drummer D. :Process combinations as a key for producing lightweight and high-duty composite structures based on thermoplastic materials 15th European Conference on Composite Materials (Venedig 24. Juni 2012 - 28. Juni 2012 )In: 15th European Conference on Composite Materials 2012 Müller T. , Gröschel C. , Drummer D. :Formgebung von thermoplastischen Faserverbundbauteilen durch Verfahrenskombination VDI Wissensforum: Composites effizient verarbeiten (Bremen In: VDI Wissensforum: Composites effizient verarbeiten 2012 Nachtrab S. , Kapfer S. , Rietzel D. , Drummer D. , Madadi M. , Arns C. , Kraynik AM. , Schröder-Turk G. , Mecke K. :Tuning Elasticity of Open-Cell Solid Foams and Bone Scaffolds via Randomized Vertex Connectivity Advanced Engineering Materials 14 2012 ), S. 120-124 ISSN: 1438-1656 10.1002/adem.201100145 Ranft F. , Drummer D. :Laser direct structuring of thermally conductive polymers MID Kongress (Fürth In: MID Kongress 2012 Ranft F. , Drummer D. :Wärmeleitende Kunststoffe für das thermische Management optoelektronischer Baugruppen VDI-Fachkonferenz (Baden-Baden In: VDI-Fachkonferenz 2012 Ranft F. , Drummer D. :Wärmeleitfähige Kunststoffe zur Temperierung mechatronischer Systeme VDI Wissensforum (Fürth In: VDI Wissensforum 2012 Ranft F. , Drummer D. , Heinle C. :Wärmemanagement mit hochgefüllten Kunststoffen Erlanger-Bayreuther-Kunststofftage (Erlangen In: Erlanger-Bayreuther-Kunststofftage 2012 Ranft F. , Heinle C. , Drummer D. :Laser direct structuring of thermally conductive polymers: An innovative thermal management approach ANTEC 2012 (Orlando 2. April 2012 - 4. April 2012 )In: SPE Proceedings ANTEC 2012 2012 Ranft F. , Heinle M. , Heinle C. , Drummer D. :Wärmeleitende Kunststoffe in der Elektronik OTTI-Fachforum (Regensburg In: OTTI-Fachforum 2012 Rudin B. , Drummer D. :Heat conductive thermosets for the injection molding process 2nd International Electric Drives Production Conference (Nürnberg 15. Oktober 2012 - 18. Oktober 2012 )In: EDPC 2012 - Proceedings 2012 10.1109/EDPC.2012.6425136 Seefried A. , Drummer D. :Elongational Rheology of Cross Linked Polymaide 12 and its Relevance for Vacuum Thermoforming POLYCHAR 20 World Forum on Advanced Materials (Dubrovnik In: POLYCHAR 20 World Forum on Advanced Materials 2012 Seefried A. , Drummer D. :The effects of radiation cross-linking and process parameters on the behavior of polyamide 12 in vacuum thermoforming Polymer Engineering and Science 52 2012 ), S. 884-892 ISSN: 0032-3888 10.1002/pen.22155 Seefried A. , Fuchs M. , Drummer D. :Radiation Cross Linking of Semi-Crystalline Thermoplastics – A Novel Approach in Modifing a Materials’s Thermoformability 8th European Thermoforming Conference (Venedig In: 8th European Thermoforming Conference 2012 Seefried A. , Fuchs M. , Drummer D. :Radiation Crosslinking of Semicrystalline Thermoplastics: A Novel Approach to Modifying a Material's Thermoformability Plastics Engineering 2012 ), S. 14-22 ISSN: 0091-9578 Vittinghoff J. , Drummer D. :Im Spritzguss stoffschlüssig verbunden Adhaesion Kleben und Dichten 2012 ), S. 2-6 ISSN: 1619-1919 Wildner W. , Drummer D. , Kühnert I. :Druckverfestigung: Übertragung der Grundlagen auf die Spritzgießvariante VDI-Fachkonferenz (Baden-Baden In: VDI-Fachkonferenz 2012 Wudy K. , Drummer D. , Kühnlein F. :Polymer Blends for Selective Laser Sintering: Material and Process Requirements Laser Assisted Net Shape Engineering 7 (Fürth In: Physics Procedia 39 2012 10.1016/j.phpro.2012.10.067 2011 Menacher M., Drummer D.:Joining of synthetic materials: Adhesive curing through vibration technology Adhaesion Kleben und Dichten 2011 ), S. 42-46 ISSN: 0943-1454 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84855671677&origin=inward Drummer D. (Hrsg.):Thermoplastische Faserverbundkunststoffe - Werkstoff | Verarbeitung | Simulation | Anwendung Erlangen 2011 ISBN: 978-3-931864-52-1 Drummer D. , Gardocki A. :Kunststoffgebundene Dauermagnete für Aktor- und Sensoranwendungen VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth In: Kunststoffe in der Mechatronik 2011 Drummer D. , Gruber K. , Meister S. :Alternating Temperature Technology Controls Parts Properties Kunststoffe International 101 2011 ), S. 25-27 ISSN: 1862-4243 Drummer D. , Gruber K. , Meister S. :Process optimization: Alternating temperature technology controls parts properties Kunststoffe International 101 2011 ), S. 25-27 ISSN: 1862-4243 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955685823&origin=inward Drummer D. , Gruber K. , Meister S. :Wechseltemperierung steuert Bauteileigenschaften Kunststoffe 101 2011 ), S. 46-49 ISSN: 0023-5563 Drummer D. , Heinle C. :Wärmeleitfähige Kunststoffe zur Temperierung mechatronischer Systeme - aus Sicht der Hochschule VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth In: Kunststoffe in der Mechatronik 2011 Drummer D. , Kobes M. , Merken D. , Meister S. :Wie das Spritzgießen den Verschleiß bei Zahnrädern reduziert Maschinenmarkt 117 2011 ), S. 36-39 ISSN: 0341-5775 Drummer D. , Kühnlein F. :Mechanische Eigenschaften und Bruchverhalten maskengesinterter Kunststoffbauteile Rapid.Tech 2011 (Erfurt In: Rapid.Tech 2011 2011 Drummer D. , Kühnlein F. :Mechanische Eigenschaften und Bruchverhalten maskengesinterter Kunststoffbauteile RTejournal - Forum für Rapid Technologie 8 2011 ), S. 1 ISSN: 1614-0923 Drummer D. , Meister S. :Dauergebrauchseigenschaften von Mikrobauteilen - Einfluss von Herstell- und Einsatzbedingungen Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011 Drummer D. , Meister S. :Einfluss von Herstell- und Umgebungsbedingungen auf die Eigenschaften spritzgegossener Mikrobauteile aus Polyamid 66 22. Technomer 2011 (Chemnitz In: 22. Technomer 2011 2011 Drummer D. , Menacher M. , Seefried A. :Vibrationsschweißen von strahlenvernetztem Polyamid 66 - Untersuchungen zur Erweiterung des Anwendungsspektrums Joining Plastics - Fügen von Kunststoffen 5 2011 ), S. 46-57 ISSN: 1864-3450 Drummer D. , Müller T. :Das Automobil von morgen - Kunststoff-Lösungen und technische Trends 35. Internationaler Kongress: Kunststoffe im Automobilbau (Mannheim In: Kunststoffe im Automobilbau 2011 Drummer D. , Müller T. , Hoffmann L. , Müller N. :Hohlkörperverbundstrukturen im Minutentakt Kunststoffe 101 2011 ), S. 110-114 ISSN: 0023-5563 Drummer D. , Müller T. , Hoffmann L. , Müller N. :Hollow Composite Structures One-a-minute Kunststoffe International 101 2011 ), S. 69-73 ISSN: 1862-4243 Drummer D. , Ranft F. :Verfahrenstechnische Herausforderungen bei der Einarbeitung von elektrisch leitfähigen Masterbatches mit Multi-walled Carbon Nanotubes im Spritzgießprozess 22. Technomer 2011 (Chemnitz In: 22. Technomer 2011 2011 Drummer D. , Seefried A. :Thermoformability of Radiation cross linked Polyamide 12 ANTEC (Boston, Massachusetts, USA 1. Mai 2011 - 5. Mai 2011 )In: SPE Proceedings ANTEC 2011 2011 Drummer D. , Vetter K. :Analyse von Skalierungseffekten beim Expansionsspritzgießen von Mikro- und Dünnwandbauteilen Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011 Drummer D. , Vetter K. :Expansion-injection-molding (EIM) by cavity near melt compression - About the process characteristic CIRP Journal of Manufacturing Science and Technology 4 2011 ), S. 376-381 ISSN: 1755-5817 10.1016/j.cirpj.2011.06.009 Drummer D. , Vetter K. :Influence of Expansion Injection Moulding (EIM) upon Part Properties 44th Conference on Manufacturing Systems (Madison, WI In: 44th Conference on Manufacturing Systems 2011 Drummer D. , Vittinghoff J. :Piezoaktive Faserverbundbauteile - Health Monitoring an verbundspritzgegossenen Sandwichstrukturen 17. Nationales Symposiu, Sampe (Aachen In: 17. Nationales Symposium 2011 Gardocki A. , Drummer D. :Funktionsorientierte Herstellung eines Encoders auf Basis kunststoffgebundener Dauermagnete im Montagespritzgießverfahren AmE 2011 - Automotive meets Electronics (Dortmund In: AmE 2011 - Automotive meets Electronics 2011 Gardocki A. , Drummer D. :Improvement of the Stability of Polymer Bonded Rare-Earth-Magnets during the Injection Molding Process ANTEC (Boston, Massachusetts, USA 1. Mai 2011 - 5. Mai 2011 )In: SPE Proceedings ANTEC 2011 2011 Gardocki A. , Drummer D. , Schmachtenberg E. :Improving the stability of magnetic fillers in plastics during processing GAK Gummi Fasern Kunststoffe 64 2011 ), S. 219-223 ISSN: 0176-1625 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955133875&origin=inward Gardocki A. , Drummer D. , Schmachtenberg E. :Verbesserung der Stabilität magnetischer Füllstoffe in Kunststoffen während der Verarbeitung GAK Gummi Fasern Kunststoffe 64 2011 ), S. 219-223 ISSN: 0176-1625 Heinle C. , Heinle M. , Drummer D. :Innovative konstruktive und fertigungstechnische Möglichkeiten zur Kühlung von LEDs mit wärmeleitfähigen Kunststoffen Symposium Connectors (Lemgo In: 3rd Symposium Connectors 2011 Heinle M. , Heinle C. , Drummer D. , Amesöder S. :Adhesive bonding between multi-material assembly injection molding parts with an adhesive interlayer Journal of Polymer Engineering 31 2011 ), S. 539-548 ISSN: 0334-6447 10.1515/POLYENG.2011.096 Hoffmann L. , Drummer D. , Müller T. :Fertigungsgerechte Gestaltung hochbelasteter Faserverbundbauteile für die Großserie 22. Technomer 2011 (Chemnitz In: 22. Technomer 2011 2011 Hoffmann L. , Renn M. , Drummer D. , Müller T. :Hochbelastbare Faserverbundbauteile großserientauglich hergestellt Lightweight Design 4 2011 ), S. 38-43 ISSN: 1865-4819 Hörber J. , Müller M. , Franke J. , Ranft F. , Heinle C. , Drummer D. :Assembly and Interconnection Technologies for MID based on Thermally Conductive Plastics for Heat Dissipation 34th International Spring Seminar on Electronics Technology (High Tatras Slovakia 11. Mai 2011 - 15. Mai 2011 )In: 34th International Spring Seminar on Electronics Technology 2011 10.1109/ISSE.2011.6053559 Hörber J. , Ranft F. , Müller M. , Franke J. , Drummer D. :Wärmeverteilung in elektronischen Baugruppen optimieren Elektronikpraxis - Profiline 2011 ), S. 74-76 ISSN: 0341-5589 Jungmeier A. , Drummer D. :Optimierungsstrategien für Mikrobauteile Kunststoffe 101 2011 ), S. 62-65 ISSN: 0023-5563 Jungmeier A. , Drummer D. :Optimization Strategies for Micro Parts Kunststoffe International 101 2011 ), S. 50-53 ISSN: 1862-4243 Jungmeier A. , Drummer D. , Kühnert I. :Dickwandige Kunststoffoptiken - Druckverfestigung als neues Verfahren für präzise Bauteile 2. VDI-Fachkonferenz: Kunststoffe in Optischen Systemen (Baden-Baden In: Kunststoffe in Optischen Systemen 2011 Menacher M. , Drummer D. :Klebstoffvernetzung durch Vibrationstechnik Adhaesion Kleben und Dichten 55 2011 ), S. 42-46 ISSN: 1619-1919 Menacher M. , Drummer D. :Vibrationsschweißen von strahlenvernetzten, technischen Thermoplasten PTS Technologie Seminar (Veserde-Wiblingwerde/Adelshofen In: PTS Technologie Seminar 2011 Merken D. , Drummer D. :Montagespritzgegossene Überlastkupplungen - EJOtorque VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth In: Kunststoffe in der Mechatronik 2011 Merken D. , Drummer D. , Kobes M. , Künkel R. , Kornsteiner W. :Der richtige Dreh (Teil 3) - Auslegungsstrategie montagespritzgegossener Rutschkupplungen Zeitschrift Kunststofftechnik 7 2011 ), S. 225-253 ISSN: 1864-2217 Merken D. , Drummer D. , Kobes M. , Künkel R. , Kornsteiner W. :The right turn (part 3) - design strategy for assembly injection moulded friction-clutches Zeitschrift Kunststofftechnik 7 2011 ), S. 225-253 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80755137035&origin=inward Möhwald K. , Bach FW. , Drummer D. , Hopmann C. , Piotter V. , Fischer T. , Meister S. , Prehm J. , Prokop J. , Vetter K. :Die Forschergruppe 702: Maschinen-, Werkzeug- und Prozessentwicklung für neue Verfahren zur Herstellung von Mikrobauteilen über flüssige Phasen Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe 11. Oktober 2011 - 12. Oktober 2011 )In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011 Müller T. , Drummer D. :Highly Filled Polymers for Mechatronic Devices Smart Plastics Congress (Linz (A) In: Smart Plastics Congress 2011 Müller T. , Drummer D. :Neue Prozessstrategien für Hybridstrukturen auf Basis faserverstärkter Thermoplaste Fachtagung Thermoplastische Faserverbundkunststoffe (Fürth In: Thermoplastische Faserverbundkunststoffe 2011 Müller T. , Drummer D. :Spritzgießen mechanisch tragender Werkstoffverbunde VDI-Jahrestagung Spritzgießen 2011 (Baden-Baden In: Spritzgießen 2011 2011 Ranft F. , Drummer D. :Effects of Masterbatch Dilution in Injection Moulding Machines on the Morphology and Electrical Properties of PA6/MWCNT Eurofillers 2011 (Dresden In: Eurofillers 2011 2011 Ranft F. , Drummer D. :Einarbeitung nanoskaliger Füllstoffe in thermoplastische Matrices mittels Masterbatches 2. VDI-Fachkonferenz Kunststoffe in Optischen Systemen" (Baden-Baden In: Kunststoffe in Optischen Systemen 2011 Ranft F. , Drummer D. :Optoelektronische Systeme auf Basis wärmeleitfähig modifizierter MIDs Workshop Innovative Anwendungen der MID-Technik (Stuttgart In: Workshop Innovative Anwendungen der MID-Technik 2011 Ranft F. , Drummer D. , Hoffmann A. :Berücksichtigung temperaturabhängiger Stoffkennwerte bei der Auslegung optischer Systeme aus Kunststoff 2. VDI-Fachkonferenz "Kunststoffe in Optischen Systemen" (Baden-Baden In: Kunststoffe in Optischen Systemen 2011 Rietzel D. , Aquite W. , Drummer D. , Osswald T. :Polymer powders for Selective Laser Sintering - Production and Characterization 44th Conference on Manufacturing Systems (Madison, WI In: 44th Conference on Manufacturing Systems 2011 Rietzel D. , Drexler M. , Drummer D. :Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten RTejournal - Forum für Rapid Technologie 8 2011 ), S. 1 ISSN: 1614-0923 Rietzel D. , Drexler M. , Kühnlein F. , Drummer D. :Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference (Austin 8. August 2011 - 10. August 2011 )In: Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2011 Rietzel D. , Drummer D. :Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten Rapid.Tech 2011 (Erfurt In: Tagungsband Rapid.Tech 2011 2011 Rudolph N. , Ehrenstein G. :High Dimensional Stability by Compression Induced Solidification The 1st Taishan Academic Forum / The 6th Qingdao International Rubber & Plastics Conference (Quindao In: The 1st Taishan Academic Forum / The 6th Qingdao International Rubber & Plastics Conference 2011 Seefried A. , Drummer D. :Improved vacuum thermoforming of polyamide SPE Plastics Research Online 2011 ), S. 1-3 10.1002/spepro.003969 http://www.4spepro.org/view.php?source=003969-2011-12-7 Seefried A. , Drummer D. :The effect of high energy electron beam radiation on the thermoformability of Polyamide 12 films 11th Annual International Polymer Colloquium (Madison, WI In: 11th Annual International Polymer Colloquium 2011 Seefried A. , Fuchs M. , Drummer D. , Schuck M. :Vernetzte, funktionalisierte Thermoplastfolien für mechatronische Anwendungen VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth In: Kunststoffe in der Mechatronik 2011 Tsigkopoulos T. , Seefried A. , Drummer D. , Weidinger P. , Bittermann J. :Auslegung langfaserverstärkter Thermoplastformteile Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 62 2011 ), S. 160-163 ISSN: 0032-1338 Vogel J. , Grewell D. , Kessler MR. , Drummer D. , Menacher M. :Ultrasonic and Impulse Welding of Polylactic Acid Films Polymer Engineering and Science 51 2011 ), S. 1059-1057 ISSN: 0032-3888 10.1002/pen.21919 Wulfhorst J. , Seide G. , Gries T. , Rietzel D. , Drummer D. :Substitution of powders by ultrashort cut fibers for selective lasersintering (SLS) 11th world textile conference AUTEX (Mulhouse (F) In: 11th world textile conference AUTEX 2011 2010 Drummer D. , Kühnlein F. , Rietzel D. , Hülder G. :Untersuchung der Materialalterung bei pulverbasierten Schichtbauverfahren RTejournal - Forum für Rapid Technologie 7 2010 ), S. 1-5 ISSN: 1614-0923 Drummer D. , Müller T. :Thermoplastische Hochleistungsfaserverbunde stehen vor einer großen Renaissance Intelligenter Produzieren 2010 ), S. 6-8 ISSN: 1869-2745 Drummer D. , Reichart M. , Meister S. :Montagespritzgießen verbindet Metall und Thermoplast Maschinenmarkt 116 2010 ), S. 34-36 ISSN: 0341-5775 Drummer D. , Rietzel D. , Kühnlein F. :Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering Physics Procedia 5 2010 ), S. 533-542 ISSN: 1875-3892 10.1016/j.phpro.2010.08.081 Drummer D. , Schmachtenberg E. , Hülder G. , Meister S. :MK2 - A novel assembly injection molding process for the combination of functional metal surfaces with polymer structures Journal of Materials Processing Technology 210 2010 ), S. 1852-1857 ISSN: 0924-0136 10.1016/j.jmatprotec.2010.06.020 Drummer D. , Seefried A. :Investigation of Thermoformability of E-Beam Cross Linked Polyamide 12 Zeitschrift Kunststofftechnik 2010 ), S. 292-315 ISSN: 1864-2217 Drummer D. , Seefried A. , Fuchs M. :Irradiation Opens up Third Film Dimension Kunststoffe International 100 2010 ), S. 49 ISSN: 1862-4243 Drummer D. , Seefried A. , Fuchs M. :Strahlen öffnen dritte Foliendimension Kunststoffe 100 2010 ), S. 55-59 ISSN: 0023-5563 Drummer D. , Vittinghoff J. , Hülder G. :Montagespritzguss piezoaktiver Sandwichverbunde Zeitschrift Kunststofftechnik 6 2010 ), S. 165-190 ISSN: 1864-2217 Feulner R. , Brocka Z. , Seefried A. , Kobes M. , Hülder G. , Osswald T. :The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact. Wear 268 2010 ), S. 905-910 ISSN: 0043-1648 10.1016/j.wear.2009.12.025 Feulner R. , Kobes M. , Merken D. , Drummer D. :Determination and use of wear qualities based on model and component tests for the design of thermoplastic gears Tribologie und Schmierungstechnik 57 2010 ), S. 9-20 ISSN: 0724-3472 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956924902&origin=inward Feulner R. , Kobes M. , Merken D. , Drummer D. :Ermittlung und Anwendung von Verschleißkennwerten basierend auf Modell und Bauteilversuchen für die Auslegung von Getrieben aus Thermoplastkunststoffen Tribologie und Schmierungstechnik 57 2010 ), S. 9-20 ISSN: 0724-3472 Fuchs M. , Drummer D. , Kilian A. , Schmidt LP. :Integration radarbasierter Fahrerassistenzsysteme in Kunststoffkarosserieteile Automotive meets Electronics (Dortmund 15. April 2010 - 16. April 2010 )In: Automotive meets Electronics , Berlin 2010 Heinle C. , Drummer D. :Potential of thermally conductive polymers for the cooling of mechatronic parts Physics Procedia 5 2010 ), S. 735-744 ISSN: 1875-3892 10.1016/j.phpro.2010.08.106 Heinle C. , Drummer D. :Wärmemanagement von LED mit wärmeleitfähigen Kunststoffen 1. VDI-Konferenz "Kunststoffe in optischen Systemen" (Erlangen In: 1. VDI-Konferenz "Kunststoffe in optischen Systemen" 2010 Heinle C. , Heinle M. , Drummer D. , Ehrenstein G. :Assembly Molding of Tight Mechatronic System - A Model Approach Journal of Manufacturing Science and Engineering 132 2010 ), S. 054505-1-054505-4 ISSN: 1087-1357 10.1115/1.4002547 Hörber J. , Franke J. , Ranft F. , Heinle C. , Drummer D. :Thermisch leitfähige Kunststoffe für eine kostengünstige Fertigung und erweiterte Funktionalität in der MID‐Technologie PLUS - Produktion von Leiterplatten und Systemen 2010 ), S. 1-10 Jungmeier A. , Drummer D. , Ehrenstein G. :New Aspects of Process-Induced Properties of Micro Injection Molded Parts Plastics Rubber and Composites 39 2010 ), S. 308-314 ISSN: 1465-8011 Jungmeier A. , Ehrenstein G. , Drummer D. :New aspects of process induced properties of microinjection moulded parts Plastics Rubber and Composites 39 2010 ), S. 308-314 ISSN: 1465-8011 10.1179/174328910X12691245470392 Kobes M. , Merken D. , Drummer D. :Tribologische Eigenschaften modifizierter Kunststoffe Tribologie- und Schmierstoffkongress GETLUB (Würzburg In: Tribologie- und Schmierstoffkongress GETLUB 2010 Kühnlein F. , Rietzel D. , Drummer D. :Feasibility study of additive manufacturing of thermally conductive pa12 powders by selective mask sintering 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956676154&origin=inward Merken D. , Kobes M. , Drummer D. :Mehr-Komponenten-Technologie steigert Leistungsfähigkeit von Kunststoffzahnrädern Tribologie- und Schmierstoffkongress GETLUB (Würzburg In: Tribologie- und Schmierstoffkongress GETLUB 2010 Rietzel D. , Kühnlein F. , Drummer D. :Characterization of new thermoplastics for additive manufacturing by selective laser sintering 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956666230&origin=inward Seefried A. , Drummer D. :Untersuchung der Thermoformbarkeit von elektronenstrahlvernetztem Polyamid 12 Zeitschrift Kunststofftechnik 6 2010 ), S. 292-315 ISSN: 1864-2217 Wartzack S. , Drummer D. , Wittmann S. , Stuppy J. , Rietzel D. , Tremmel S. , Kühnlein F. :Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile RTejournal - Forum für Rapid Technologie 7 2010 ), S. - ISSN: 1614-0923 2009 Drummer D. :Tight material bonds within mechatronic systems by assembly moulding Zeitschrift Kunststofftechnik 2009 ), S. 427-450 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77949286283∨igin=inward Drummer D. , Fuchs M. :Innovative Automobilradaranwendungen durch Folientechnologie Technomer: 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz 12. November 2009 - 14. November 2009 )In: Technomer 2009 Drummer D. , Kühnlein F. , Rietzel D. :Funktionalisierte Bauteile durch Selektives Maskensintern RTejournal - Forum für Rapid Technologie 6 2009 ), S. 1-5 ISSN: 1614-0923 Drummer D. , Rietzel D. , Kühnlein F. :Selektives Lasersintern von teilkristallinen Thermoplasten RTejournal - Forum für Rapid Technologie 6 2009 ), S. 1-5 ISSN: 1614-0923 Egelkraut S. , Rauch M. , Schletz A. , Gardocki A. , März M. , Ryssel H. :Polymer bonded soft magnetics for EMI filter applications 3rd Int. Conference on Automotive Power Electronics (APE) (Paris 25. März 2009 - 26. März 2009 )Fuchs M. , Drummer D. , Kilian A. , Schmidt LP. :Untersuchungen zur Eignung heißgeprägter Folien für die Integration von Antennen in Automotive-Exterieurbauteile Zeitschrift Kunststofftechnik 5 2009 ), S. 385-410 ISSN: 1864-2217 Gardocki A. , Heinle C. , Drummer D. :Verbesserung der Stabilität kunststoffgebundener Selten-Erd Dauermagnete während der Verarbeitung und im Gebrauch 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz In: Technomer 2009 Heinle C. , Drummer D. , Ehrenstein G. :Thermally conductive modified polymers- Part 1: Experimental analysis and modelling description of a process dependent part property Zeitschrift Kunststofftechnik 2009 ), S. 338-358 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=70349538917&origin=inward Heinle C. , Drummer D. , Ehrenstein G. :Wärmeleitfähig modifizierte Kunststoffe - Teil 1: experimentelle Analyse und Modellbeschreibung einer bauteil- und prozessabhängigen Materialeigenschaft Zeitschrift Kunststofftechnik 5 2009 ), S. 338-358 ISSN: 1864-2217 Krippner S. , Feulner R. , Kobes M. , Hülder G. , Drummer D. :2K-Hochleistungszahnräder - Läuft wie geschmiert Kunststoffe 99 2009 ), S. 38-42 ISSN: 0023-5563 Vetter K. , Kühnert I. , Hülder G. , Drummer D. :Einfluss der Prozesscharakteristik des Expansionsspritzgießens auf die Eigenschaften von Mikrobauteilen aus PP 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz In: Technomer 2009 2008 Al-Sheyyab A., Massimo Cojutti, Kägeler C., Detlev Staud, et al.:Flächige Leichtbauteile: Anwendungsmöglichkeiten im Automobilbau Konstruktion 60 2008 ), S. 78-82 ISSN: 0720-5953 Amesöder S. , Feulner R. , Drummer D. , Künkel R. , Ehrenstein G. :Der richtige Dreh (Teil 1) - Kennwertermittlung für das Montagespritzgießen Zeitschrift Kunststofftechnik 4 2008 ), S. 1-21 ISSN: 1864-2217 Eimeke S. , Gardocki A. , Drummer D. , Ehrenstein G. :Verarbeitungseinflüsse beim Spritzgießen multipolarer, kunststoffgebundener Dauermagnete Zeitschrift Kunststofftechnik 4 2008 ), S. 1-33 ISSN: 1864-2217 Eimeke S. , Gardocki A. , Ehrenstein G. , Drummer D. :Effects during injection molding of polymer- bonded magnets with multipolar structure Zeitschrift Kunststofftechnik 2008 )ISSN: 1864-2217 Rechtenwald T. , Kopczynska A. , Schmachtenberg E. , Devrient M. , Frick T. , Schmidt M. :Investigation of Material Compatibility for Embedding Stereolithography In: Proceedings of the Conference Multi-Material Micro Manufacture 4M 2008 2007 Al-Sheyyab A. , Blankl A. , Leitz KH. , Vogt U. , Weickmann J. , Wittmann S. :Qualitätsmanagement komplexer Verbundforschungsprojekte QZ Qualität und Zuverlässigkeit 2007 ), S. 46-47 ISSN: 0720-1214 Fuchs M. , Kilian A. , Brocka Z. , Schmachtenberg E. , Schmidt LP. :Karosserieaussenhaut mit integrierter Antenne Kunststoffe 2007 ), S. 56-63 ISSN: 0023-5563 Fuchs M. , Kilian A. , Brocka Z. , Schmachtenberg E. , Schmidt LP. :Outer Body Skin with an Integrated Antenna Kunststoffe International 2007 ), S. 26-30 ISSN: 1862-4243 Ziegler C. , Stockinger A. , Stoll T. , Wittmann S. , Weickmann J. , Schmidt J. , Schuck M. , Cojutti M. , Al-Sheyyab A. :Produktionsmanagement als effizientes Werkzeug zur Vernetzung von Forschungsprojekten Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 2007 ), S. 765-770 ISSN: 0932-0482 10.3139/104.101215 2005 2004 2003 Amesöder S. , Fernandez L. , Niemann H. , Deventer R. , Ehrenstein G. :Werkstoff- und prozessoptimierte Herstellung flächiger Kunststoff-Kunststoff und Kunststoff-Metall-Verbundbauteile DFG Sonderforschungsbereich 396 Berichts- und Industriekolloqium 15./16. Oktober 2003 (Erlangen 15. Oktober 2003 - 16. Oktober 2003 )In: Geiger Manfred, Ehrenstein Gottfried W. (Hrsg.): DFG Sonderforschungsbereich 396 Berichts- und Industriekolloqium 15./16. Oktober 2003 , Bamberg 2003 http://www5.informatik.uni-erlangen.de/Forschung/Publikationen/2003/Ehrenstein03-WUP.pdf Dörfler R. , Drummer D. , Ehrenstein G. :Intelligent machine technology for flat, lightweight components Kunststoffe 93 2003 ), S. 48-50 ISSN: 0023-5563 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0038275781&origin=inward 2001 Eßer G. , Müller J. :Lasergestützte additive Leiterbilderzeugung In: Geiger, M.; Fleckenstein, M. (Hrsg.): Laser in der Elektronikproduktion & Feinwerktechnik - Tagungsband des 4. Erlanger Seminars LEF 2001 2001 Eßer G. , Müller J. :Produktionsentstehung eines ölstandssensors in MID-Technik: Vorteile der Laserstrukturierung In: Feldmann, K. (Hrsg.): Fachseminar - Innovative Produktgestaltung mit MID, 18.01. und 05.04. 2001 Huber A. , Müller J. , Meyer-Pittroff F. :Laserstrahljustieren als Innovation für die Montage von Mikrosystemen In: Idee-Vision-Innovation 2001 , S. 275-286 Hüske M. , Kickelhain J. , Müller J. , Eßer G. :Laser supported activation and additive metallization of thermoplastics for 3D-MIDs In: Geiger, M.; Otto, A. (Hrsg.): Laser Assisted Net Shape Engineering 3 - Proceedings of the LANE 2001, Erlangen 28.-31.08 2001 Reindl L. , Ruppel CCW. , Berek S. , Knauer U. , Vossiek M. , Heide P. , Oreans L. :Design, fabrication, and application of precise SAW delay lines used in an FMCW radar system IEEE Transactions on Microwave Theory and Techniques 49 2001 ), S. 787-794 ISSN: 0018-9480 10.1109/22.915465 1998 Hassmann J. , Hahn CY. , Waldmann O. , Volz E. , Schleemilch HJ. , Hallschmid N. , Müller P. , Hanan GS. , Volkmer D. , Schubert US. , Lehn JM. , Mauser H. , Hirsch A. , Clark T. :Structural and electronic properties of self-assembled supramolecular grid structures: Doping of supramolecular thin films Materials Research Society Symposium - Proceedings 488 1998 ), S. 447-452 ISSN: 0272-9172 https://www.scopus.com/record/display.uri?eid=2-s2.0-17144462000&origin=inward 1996